Electrical units: mA, A, Ω & kΩ
Convert prefixes before substitution and report the requested unit.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Useful earlier sections
Understand the electrical relationship
Prefixes change scale, not the quantity. Milli means one thousandth: 1 mA = 0.001 A and 1 A = 1,000 mA. Kilo means one thousand: 1 kΩ = 1,000 Ω. Symbols are case-sensitive. Writing 250 mA as 250 A makes the current one thousand times too large; this is a unit error, not a rounding difference.
In V = IR, using amperes and ohms produces volts. Convert before substituting: 4.7 kΩ becomes 4,700 Ω and 2 mA becomes 0.002 A. Then 0.002 × 4,700 gives 9.4 V. Keep the conversion line on paper so it is clear where the zeros came from.
A consistent shortcut is volts divided by kilohms gives milliamperes: 12 V / 3 kΩ = 4 mA. The factor of one thousand is already included in the resistance unit. Use this shortcut only when you can explain the units; mixing kilohms and amperes without conversion does not directly give volts.
Solve and check the problem
Write the original value, the base-unit value, and the requested output. Convert mA to A by dividing by 1,000; convert A to mA by multiplying by 1,000. Convert kΩ to Ω by multiplying by 1,000. A measurement has a larger number when it is expressed in a smaller unit.
Calculate in base units, then convert once at the end if necessary. A result of 0.006 A means 6 mA, not 0.006 mA. Do not round a small current to zero before completing a problem. In these exercises, enter only the numeric value in the unit named in the question.
Make unit conversions part of the solution
A prefix acts as a multiplier. Write 1 mA = 10⁻³ A and 1 kΩ = 10³ Ω, then cancel units as you would cancel common factors in a fraction. For example, a current in mA multiplied by resistance in kΩ produces volts because the thousandth and thousand cancel. A current in A multiplied by kΩ produces thousands of volts instead. The shortcut is useful only when the prefix pair is exact; a unit label is part of the mathematics rather than decoration added afterward.
Converting to a smaller unit makes the numerical value larger, while converting to a larger unit makes it smaller. This gives an independent direction check before calculation. A few milliamperes should become a small decimal in amperes. Several kilohms should become thousands of ohms. Preserve leading zeros: 0.0048 A differs from 0.048 A by a factor of ten. Avoid rounding until the requested final answer; a current rounded prematurely to zero would make a later resistance calculation impossible.
Separate three jobs on paper: normalize inputs, apply the electrical relationship, then express the result in the requested unit. If the output asks for mA, dividing voltage by ohms produces amperes first and requires a final multiplication by 1,000. If the output asks for kΩ, voltage divided by amperes produces ohms first and requires division by 1,000. For a comparison problem, convert both candidate values to one common unit before subtracting or taking a ratio. Adding bare numbers with different prefixes silently combines unlike scales and produces an answer that cannot be checked.
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
Find current in mA: 9 V across 3 kΩ.
- 3 kΩ = 3,000 Ω.
- I = 9/3,000 = 0.003 A.
- 0.003 × 1,000 = 3 mA.
- Check: 0.003 × 3,000 = 9 V.
Answer: 3 mA
Worked example 2
Find resistance in kΩ: 12 V at 4 mA.
- 4 mA = 0.004 A.
- R = 12/0.004 = 3,000 Ω.
- 3,000/1,000 = 3 kΩ.
- Check: 0.004 × 3,000 = 12 V.
Answer: 3 kΩ
Worked example 3
A 3.6 kΩ resistor has 16.2 V across it. Find current in both A and mA.
- Normalize resistance: 3.6 kΩ = 3,600 Ω.
- I = 16.2/3,600 = 0.0045 A.
- Convert the output: 0.0045 × 1,000 = 4.5 mA.
- Check using the paired prefixes: 4.5 mA × 3.6 kΩ = 16.2 V.
Answer: 0.0045 A = 4.5 mA
Worked example 4
A 1.75 kΩ resistor carries 8 mA. Its current later becomes 0.012 A. Find the increase in voltage across it.
- Use one current unit: 8 mA = 0.008 A and 1.75 kΩ = 1,750 Ω.
- Initial V = 0.008 × 1,750 = 14 V.
- Later V = 0.012 × 1,750 = 21 V.
- Increase = 21 − 14 = 7 V. Equivalently, the 4 mA increase times 1.75 kΩ gives 7 V.
Answer: 7 V
Common mistakes and checks
Do not ignore a prefix or convert twice. V/Ω gives A, whereas V/kΩ gives mA.
Check your understanding
- Convert prefixes explicitly; mA means 0.001 A and kΩ means 1,000 Ω.
- V/kΩ yields mA, while V/Ω yields A.
- Normalize inputs, calculate, then convert the requested output once.
Concept reference: OpenStax: Ohm’s law and simple circuits. Teaching, examples, and questions here are original educational exercises.
Step 1 of 8 · Understand the task
Keep the electrical quantity while changing its scale
A current written in milliamperes is still current, and resistance written in kilohms is still resistance. Prefixes change the size of the named unit, so they change the numerical value used in a calculation.
Label both the given unit and the requested answer unit. A correct quotient in amperes can still be the wrong entry when milliamperes are requested.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
Milli and kilo act in opposite directions
Milli means one thousandth:1 mA=0.001 A. Kilo means one thousand:1 kΩ=1000 Ω. Normalize inputs before applying V=IR, then convert the result into its requested unit. A direction estimate helps catch factors of 1000.
Check your understanding
Compatible prefix pairs can cancel
Multiplying mA by kΩ gives volts because the thousandth and thousand multipliers cancel. Voltage divided by kΩ gives mA, while voltage divided by Ω gives A. Use the paired shortcut only when both unit prefixes are exactly the stated ones.
Check your understanding
Detailed explanation and checks
Useful earlier sections
Understand the electrical relationship
Prefixes change scale, not the quantity. Milli means one thousandth: 1 mA = 0.001 A and 1 A = 1,000 mA. Kilo means one thousand: 1 kΩ = 1,000 Ω. Symbols are case-sensitive. Writing 250 mA as 250 A makes the current one thousand times too large; this is a unit error, not a rounding difference.
In V = IR, using amperes and ohms produces volts. Convert before substituting: 4.7 kΩ becomes 4,700 Ω and 2 mA becomes 0.002 A. Then 0.002 × 4,700 gives 9.4 V. Keep the conversion line on paper so it is clear where the zeros came from.
A consistent shortcut is volts divided by kilohms gives milliamperes: 12 V / 3 kΩ = 4 mA. The factor of one thousand is already included in the resistance unit. Use this shortcut only when you can explain the units; mixing kilohms and amperes without conversion does not directly give volts.
Solve and check the problem
Write the original value, the base-unit value, and the requested output. Convert mA to A by dividing by 1,000; convert A to mA by multiplying by 1,000. Convert kΩ to Ω by multiplying by 1,000. A measurement has a larger number when it is expressed in a smaller unit.
Calculate in base units, then convert once at the end if necessary. A result of 0.006 A means 6 mA, not 0.006 mA. Do not round a small current to zero before completing a problem. In these exercises, enter only the numeric value in the unit named in the question.
Make unit conversions part of the solution
A prefix acts as a multiplier. Write 1 mA = 10⁻³ A and 1 kΩ = 10³ Ω, then cancel units as you would cancel common factors in a fraction. For example, a current in mA multiplied by resistance in kΩ produces volts because the thousandth and thousand cancel. A current in A multiplied by kΩ produces thousands of volts instead. The shortcut is useful only when the prefix pair is exact; a unit label is part of the mathematics rather than decoration added afterward.
Converting to a smaller unit makes the numerical value larger, while converting to a larger unit makes it smaller. This gives an independent direction check before calculation. A few milliamperes should become a small decimal in amperes. Several kilohms should become thousands of ohms. Preserve leading zeros: 0.0048 A differs from 0.048 A by a factor of ten. Avoid rounding until the requested final answer; a current rounded prematurely to zero would make a later resistance calculation impossible.
Separate three jobs on paper: normalize inputs, apply the electrical relationship, then express the result in the requested unit. If the output asks for mA, dividing voltage by ohms produces amperes first and requires a final multiplication by 1,000. If the output asks for kΩ, voltage divided by amperes produces ohms first and requires division by 1,000. For a comparison problem, convert both candidate values to one common unit before subtracting or taking a ratio. Adding bare numbers with different prefixes silently combines unlike scales and produces an answer that cannot be checked.
Common mistakes and checks
Do not ignore a prefix or convert twice. V/Ω gives A, whereas V/kΩ gives mA.
- Convert prefixes explicitly; mA means 0.001 A and kΩ means 1,000 Ω.
- V/kΩ yields mA, while V/Ω yields A.
- Normalize inputs, calculate, then convert the requested output once.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
Find current in mA: 9 V across 3 kΩ.
- 3 kΩ = 3,000 Ω.
- I = 9/3,000 = 0.003 A.
- 0.003 × 1,000 = 3 mA.
- Check: 0.003 × 3,000 = 9 V.
Answer: 3 mA
Worked example 2
Find resistance in kΩ: 12 V at 4 mA.
- 4 mA = 0.004 A.
- R = 12/0.004 = 3,000 Ω.
- 3,000/1,000 = 3 kΩ.
- Check: 0.004 × 3,000 = 12 V.
Answer: 3 kΩ
Worked example 3
A 3.6 kΩ resistor has 16.2 V across it. Find current in both A and mA.
- Normalize resistance: 3.6 kΩ = 3,600 Ω.
- I = 16.2/3,600 = 0.0045 A.
- Convert the output: 0.0045 × 1,000 = 4.5 mA.
- Check using the paired prefixes: 4.5 mA × 3.6 kΩ = 16.2 V.
Answer: 0.0045 A = 4.5 mA
Worked example 4
A 1.75 kΩ resistor carries 8 mA. Its current later becomes 0.012 A. Find the increase in voltage across it.
- Use one current unit: 8 mA = 0.008 A and 1.75 kΩ = 1,750 Ω.
- Initial V = 0.008 × 1,750 = 14 V.
- Later V = 0.012 × 1,750 = 21 V.
- Increase = 21 − 14 = 7 V. Equivalently, the 4 mA increase times 1.75 kΩ gives 7 V.
Answer: 7 V
Explain the worked method
Compare the two conditions
Predict each result from its stated conditions, then compare the explanations. Identify which changed condition makes the difference.
Paired prefixes
A 1.5 kΩ resistor carries 12 mA in an ideal paper model.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
A resistor of 1.75 kΩ carries 3 mA. Find its voltage in V after accounting for both prefixes.
The milli and kilo factors cancel in the product.
Planning step 1 of 3
There is 7 V across 2 kΩ. Find current in A, not mA.
Convert kilohms before dividing, then retain the requested ampere unit.
Planning step 1 of 2
At 9 V, a resistor carries 4 mA. Find resistance in kΩ.
V/mA gives kΩ; verify in base units.
Planning step 1 of 2
An input current rises from 3 mA to 0.00475 A. Find the increase in mA.
Normalize both currents to mA before subtracting.
Planning step 1 of 1
A 2 kΩ resistor is in series with 1125 Ω. Find their total resistance in Ω.
Convert to the same unit before adding series resistances.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
A 2.25 kΩ resistor initially carries 4 mA, then 6.25 mA. Find the increase in its voltage in V.
Two equal parallel branches each carry 3 mA at 5.25 V. Find source current in A.
A calculation gives 0.00225 A through a 2400 Ω resistor. Find the current in mA before using any other formula.
A component has 9 V at 4 mA. A learner reports 2.25 Ω. By what factor is the correct resistance larger than that report?
A 1.75 kΩ resistor and a 2.5 kΩ resistor are compared. What is their resistance difference in Ω?
Video explanation: Electrical units: mA, A, Ω & kΩ
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
Converting Units With Conversion Factors - Metric System Review & Dimensional Analysis
The Organic Chemistry Tutor · YouTube
Review metric prefixes and conversion factors, then apply the same method to milliamps, amps, ohms, and kilohms in this section.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.