All lessons

Understand voltage, current and resistance

Voltage, current and resistance describe different features of an electrical circuit. Voltage is the difference in electrical energy per unit of charge between two points. Its unit is the volt (V): one volt means one joule of energy per coulomb of charge. Current is the amount of charge passing a point each second, measured in amperes (A). Resistance describes how a component opposes current for a stated voltage, measured in ohms (Ω). Current is not voltage, and a resistor transfers energy without using up the charge flowing through it.

Ohm’s law connects these quantities for ohmic components: V = I × R. An ohmic component has approximately constant resistance over the stated conditions, including temperature. Identify which quantity is missing, convert compatible units and rearrange the relationship before inserting values. The triangle helps recall V = I × R, I = V ÷ R and R = V ÷ I. You can then explain how a change affects current, calculate electrical quantities and check simplified series and parallel circuits. These paper models support understanding; correct arithmetic alone does not establish equipment safety.

What you will learn

  • Explain voltage across a component, current through it and resistance using the correct units.
  • Use the Ohm’s law triangle, convert electrical prefixes and calculate V, I or R.
  • Calculate equivalent resistance and check current and voltage in simple circuits.

Find current through an ideal resistor

An ideal 30 Ω resistor has 9 V across it. What current flows through it?

Current is the unknown, so use I = V ÷ R. Substitute values for this same resistor: I = 9 ÷ 30 = 0.3 A. Check: 0.3 A × 30 Ω = 9 V.

Section assessments are untimed: 8 out of 10 records a pass. After passing every section, the mixed final requires 16 out of 20. These are website learning thresholds.

Begin first section

Section learning objectives

  1. Voltage, current & resistance

    Distinguish volts, amperes, and ohms before using an electrical formula.

  2. Electrical units: mA, A, Ω & kΩ

    Convert prefixes before substitution and report the requested unit.

  3. Calculate current: I = V ÷ R

    Rearrange Ohm’s law for current and verify the answer by multiplication.

  4. Calculate voltage: V = I × R

    Find voltage across a resistor and distinguish voltage drop from current.

  5. Calculate resistance: R = V ÷ I

    Find resistance, including decimal currents, and recognize invalid division by zero.

  6. Proportions & checking electrical answers

    Predict changes in current while stating which quantity remains fixed.

  7. Series & parallel resistor circuits

    Find equivalent resistance and apply Ohm’s law to total or branch quantities correctly.