Metric conversions & compatible units
Convert length, mass, and volume before combining quantities.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Useful earlier sections
- Multiply and divide decimals.
- Recognize length, mass and volume units.
Understand the concept
A unit is a chosen size of measurement. The same mass can be 2.5 kilograms or 2,500 grams. Converting units changes the written number, not the physical amount.
Useful relationships are 1 m = 100 cm, 1 kg = 1,000 g, and 1 L = 1,000 mL. Moving to a smaller unit requires more of those units; moving to a larger unit requires fewer.
Apply the method
Write the relationship, decide whether the target unit is smaller or larger, then multiply or divide by the factor. Convert all values into one unit before addition or subtraction.
Check direction: 2 metres cannot be 0.02 centimetres, because centimetres are smaller. Do not assume every metric step uses 100; kilograms to grams uses 1,000.
Use a conversion relationship as a check
Write the equality before converting: 1 L = 1000 mL, 1 kg = 1000 g and 1 m = 100 cm. Multiplying by a conversion factor changes the written unit while preserving the physical amount. The number should grow when the target units are smaller.
Convert every repeated component too. A tank withdrawal of several 350 mL bottles is count × 350 mL, not one bottle. Subtract only after the tank volume and total withdrawal have the same unit.
Include material allowances and packaging
A finished strip may need extra input material for trimming. If the allowance is per strip, add it to each strip length before dividing the available reel. A one-time end trim would instead be subtracted from the reel first; the wording decides.
Gross mass combines packaging and contents. Convert grams and kilograms before addition, then state the requested output unit. Linear conversion factors cannot be reused unchanged for area and volume: square and cubic units require the factor to be squared or cubed, as the applied geometry section explains.
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
Subtract 350 mL from 1.2 L.
- 1.2 L = 1.2 × 1,000 = 1,200 mL.
- 1,200 − 350 = 850 mL.
Answer: 850 mL
Worked example 2
Convert 250 cm to metres.
- 100 cm = 1 m, so divide by 100.
- 250 ÷ 100 = 2.5.
Answer: 2.5 m
Worked example 3
A tank starts with 17.2 L. Draw 15 bottles of 350 mL each. How many mL remain?
- Initial volume = 17.2 × 1000 = 17200 mL.
- Drawn volume = 15 × 350 = 5250 mL.
- Remaining = 17200 − 5250 = 11950 mL.
Answer: 11950
Worked example 4
An empty crate is 650 g. It holds 22 parts of 0.28 kg each. What is gross mass in kg?
- 650 g = 0.65 kg.
- Parts mass = 22 × 0.28 = 6.16 kg.
- Gross mass = 0.65 + 6.16 = 6.81 kg.
Answer: 6.81
Common mistakes and checks
Numbers expressed in different units cannot be combined until their units agree.
Check your understanding
- Convert to one compatible unit before combining.
- Allowances repeated per item belong in the item size.
- Gross mass includes contents plus container.
Step 1 of 8 · Understand the task
Convert before combining measurements
Different written numbers can represent the same amount: one litre is 1000 millilitres and one kilogram is 1000 grams. Adding unlike written units directly mixes different-sized parts.
Write a conversion equality, choose one common unit, then calculate. The requested output unit determines any final conversion.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
A smaller unit needs a larger numerical count
One metre contains 100 centimetres. Converting metres to centimetres multiplies by 100, while the reverse divides by 100. The physical length is unchanged. Use a direction check before calculating to catch a reversed conversion factor.
Check your understanding
Include each allowance and each container correctly
A trimming allowance per strip belongs in every strip’s input length. An empty crate is one mass added after all repeated part masses. Convert both the usable stock and the repeated item size into compatible units before division or addition.
Check your understanding
Detailed explanation and checks
Useful earlier sections
- Multiply and divide decimals.
- Recognize length, mass and volume units.
Understand the concept
A unit is a chosen size of measurement. The same mass can be 2.5 kilograms or 2,500 grams. Converting units changes the written number, not the physical amount.
Useful relationships are 1 m = 100 cm, 1 kg = 1,000 g, and 1 L = 1,000 mL. Moving to a smaller unit requires more of those units; moving to a larger unit requires fewer.
Apply the method
Write the relationship, decide whether the target unit is smaller or larger, then multiply or divide by the factor. Convert all values into one unit before addition or subtraction.
Check direction: 2 metres cannot be 0.02 centimetres, because centimetres are smaller. Do not assume every metric step uses 100; kilograms to grams uses 1,000.
Use a conversion relationship as a check
Write the equality before converting: 1 L = 1000 mL, 1 kg = 1000 g and 1 m = 100 cm. Multiplying by a conversion factor changes the written unit while preserving the physical amount. The number should grow when the target units are smaller.
Convert every repeated component too. A tank withdrawal of several 350 mL bottles is count × 350 mL, not one bottle. Subtract only after the tank volume and total withdrawal have the same unit.
Include material allowances and packaging
A finished strip may need extra input material for trimming. If the allowance is per strip, add it to each strip length before dividing the available reel. A one-time end trim would instead be subtracted from the reel first; the wording decides.
Gross mass combines packaging and contents. Convert grams and kilograms before addition, then state the requested output unit. Linear conversion factors cannot be reused unchanged for area and volume: square and cubic units require the factor to be squared or cubed, as the applied geometry section explains.
Common mistakes and checks
Numbers expressed in different units cannot be combined until their units agree.
- Convert to one compatible unit before combining.
- Allowances repeated per item belong in the item size.
- Gross mass includes contents plus container.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
Subtract 350 mL from 1.2 L.
- 1.2 L = 1.2 × 1,000 = 1,200 mL.
- 1,200 − 350 = 850 mL.
Answer: 850 mL
Worked example 2
Convert 250 cm to metres.
- 100 cm = 1 m, so divide by 100.
- 250 ÷ 100 = 2.5.
Answer: 2.5 m
Worked example 3
A tank starts with 17.2 L. Draw 15 bottles of 350 mL each. How many mL remain?
- Initial volume = 17.2 × 1000 = 17200 mL.
- Drawn volume = 15 × 350 = 5250 mL.
- Remaining = 17200 − 5250 = 11950 mL.
Answer: 11950
Worked example 4
An empty crate is 650 g. It holds 22 parts of 0.28 kg each. What is gross mass in kg?
- 650 g = 0.65 kg.
- Parts mass = 22 × 0.28 = 6.16 kg.
- Gross mass = 0.65 + 6.16 = 6.81 kg.
Answer: 6.81
Explain the worked method
Compare the two conditions
Predict each result from its stated conditions, then compare the explanations. Identify which changed condition makes the difference.
One-time end trim
A 200 cm reel loses 10 cm once before cutting 20 cm pieces.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
A tank starts with 5.2 L. Draw 3 bottles of 350 mL each. How many mL remain?
Convert the tank to mL before subtracting all bottles.
Planning step 1 of 3
A reel has 4.5 m. Each finished strip needs 24 cm plus 1 cm trimming allowance. How many strips can be made?
The allowance is used for every strip; convert metres to centimetres.
Planning step 1 of 2
An empty crate is 650 g. It holds 6 parts of 0.28 kg each. What is gross mass in kg?
Convert the empty crate to the same unit as its contents.
Planning step 1 of 2
A tank starts with 6.2 L. Draw 4 bottles of 350 mL each. How many mL remain?
Convert the tank to mL before subtracting all bottles.
Planning step 1 of 1
A reel has 5.5 m. Each finished strip needs 24 cm plus 1 cm trimming allowance. How many strips can be made?
The allowance is used for every strip; convert metres to centimetres.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
An empty crate is 650 g. It holds 7 parts of 0.28 kg each. What is gross mass in kg?
A tank starts with 7.2 L. Draw 5 bottles of 350 mL each. How many mL remain?
A reel has 6.5 m. Each finished strip needs 24 cm plus 1 cm trimming allowance. How many strips can be made?
An empty crate is 650 g. It holds 8 parts of 0.28 kg each. What is gross mass in kg?
A tank starts with 8.2 L. Draw 6 bottles of 350 mL each. How many mL remain?
Video explanation: Metric conversions & compatible units
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
Converting Units With Conversion Factors - Metric System Review & Dimensional Analysis
The Organic Chemistry Tutor · YouTube
Follow the conversion-factor method and cancel units explicitly. Keep quantities in compatible units before adding or comparing them.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.