Percentages of a quantity
Interpret a percentage as a fraction out of 100.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Useful earlier sections
- Convert simple fractions and decimals.
- Distinguish a part from its reference whole.
Understand the concept
Percent means per hundred. 15% is 15/100, or 0.15. To find a percentage of a quantity, multiply the quantity by this decimal. The quantity after “of” is the reference whole.
Mental shortcuts can reduce arithmetic: 10% is one tenth, 5% is half of 10%, and 1% is one hundredth. Add these components for percentages such as 15% or 21%.
Apply the method
Write percentage ÷ 100 × total. Check that a percentage below 100% gives a part smaller than the positive whole.
When asked what percentage a part represents, reverse the calculation: part ÷ whole × 100. Distinguish “find 15%” from “find what percentage”.
Choose which percentage quantity is unknown
A percentage problem has a part, a whole and a rate. Write part = decimal rate × whole and locate the unknown. If the part and rate are given, divide by the rate; multiplying again would find a fraction of the already reduced part.
Familiar exact shares can speed up inverse problems. 12.5% is 1/8, 37.5% is 3/8 and 62.5% is 5/8. They are exact relationships, not shortcuts that change the denominator. Use the original whole consistently.
Check percent versus decimal share
A ratio of 0.075 equals 7.5%, because percent expresses the same share per hundred. If an input asks for the percentage without the sign, enter 7.5. The number 0.075 would be one hundred times too small for that requested format.
Percentages of the same whole can be added directly. Percentages applied sequentially to a remainder cannot. Read repeated phrases such as of the original supply carefully; they determine whether two used shares can be combined before subtraction.
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
Find 15% of 200.
- 10% of 200 = 20.
- 5% of 200 = 10.
- 15% = 20 + 10 = 30.
Answer: 30
Worked example 2
12 out of 240 parts are rejects. What percentage is that?
- 12 ÷ 240 = 0.05.
- 0.05 × 100 = 5%.
Answer: 5%
Worked example 3
255 parts are 12.5% of a batch. How many parts are in the whole batch?
- 12.5/100 = 0.125 = 1/8.
- If one eighth is 255, eight eighths are 255 × 8.
- The whole is 2040 pieces; check its 12.5% equals the given part.
Answer: 2040
Worked example 4
A supply has 880 labels. A first job uses 15% of the ORIGINAL supply and a second uses 22.5% of the ORIGINAL supply. How many labels remain?
- Used share = 15% + 22.5% = 37.5%; remaining = 62.5%.
- 62.5% = 5/8, so remaining labels = 880 ÷ 8 × 5.
- There are 550 labels left. A percentage of a changing remainder would be a different problem.
Answer: 550
Common mistakes and checks
15% means 0.15 times the whole, not 15 times the whole.
Check your understanding
- Part = rate/100 × whole.
- Whole = part divided by the decimal rate.
- Percent = part/whole × 100.
Step 1 of 8 · Understand the task
Identify the part, whole and rate
A percentage describes a share per hundred. The same percentage can give very different counts when the batch size changes.
Locate which of the three quantities is missing before choosing multiplication or division.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
Use part = decimal rate × whole
Divide a percentage by 100 to write its decimal rate. Multiply the whole to find a part; divide a known part by the decimal rate to find its whole. A rate calculation instead divides part by whole and multiplies by 100.
Check your understanding
Keep the percentage base visible
Shares of the same original whole can be combined directly. Shares of different groups or a changing remainder cannot. A decimal share 0.075 must become 7.5 when the requested answer is a numerical percentage without its sign.
Check your understanding
Detailed explanation and checks
Useful earlier sections
- Convert simple fractions and decimals.
- Distinguish a part from its reference whole.
Understand the concept
Percent means per hundred. 15% is 15/100, or 0.15. To find a percentage of a quantity, multiply the quantity by this decimal. The quantity after “of” is the reference whole.
Mental shortcuts can reduce arithmetic: 10% is one tenth, 5% is half of 10%, and 1% is one hundredth. Add these components for percentages such as 15% or 21%.
Apply the method
Write percentage ÷ 100 × total. Check that a percentage below 100% gives a part smaller than the positive whole.
When asked what percentage a part represents, reverse the calculation: part ÷ whole × 100. Distinguish “find 15%” from “find what percentage”.
Choose which percentage quantity is unknown
A percentage problem has a part, a whole and a rate. Write part = decimal rate × whole and locate the unknown. If the part and rate are given, divide by the rate; multiplying again would find a fraction of the already reduced part.
Familiar exact shares can speed up inverse problems. 12.5% is 1/8, 37.5% is 3/8 and 62.5% is 5/8. They are exact relationships, not shortcuts that change the denominator. Use the original whole consistently.
Check percent versus decimal share
A ratio of 0.075 equals 7.5%, because percent expresses the same share per hundred. If an input asks for the percentage without the sign, enter 7.5. The number 0.075 would be one hundred times too small for that requested format.
Percentages of the same whole can be added directly. Percentages applied sequentially to a remainder cannot. Read repeated phrases such as of the original supply carefully; they determine whether two used shares can be combined before subtraction.
Common mistakes and checks
15% means 0.15 times the whole, not 15 times the whole.
- Part = rate/100 × whole.
- Whole = part divided by the decimal rate.
- Percent = part/whole × 100.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
Find 15% of 200.
- 10% of 200 = 20.
- 5% of 200 = 10.
- 15% = 20 + 10 = 30.
Answer: 30
Worked example 2
12 out of 240 parts are rejects. What percentage is that?
- 12 ÷ 240 = 0.05.
- 0.05 × 100 = 5%.
Answer: 5%
Worked example 3
255 parts are 12.5% of a batch. How many parts are in the whole batch?
- 12.5/100 = 0.125 = 1/8.
- If one eighth is 255, eight eighths are 255 × 8.
- The whole is 2040 pieces; check its 12.5% equals the given part.
Answer: 2040
Worked example 4
A supply has 880 labels. A first job uses 15% of the ORIGINAL supply and a second uses 22.5% of the ORIGINAL supply. How many labels remain?
- Used share = 15% + 22.5% = 37.5%; remaining = 62.5%.
- 62.5% = 5/8, so remaining labels = 880 ÷ 8 × 5.
- There are 550 labels left. A percentage of a changing remainder would be a different problem.
Answer: 550
Explain the worked method
Compare the two conditions
Predict each result from its stated conditions, then compare the explanations. Identify which changed condition makes the difference.
Find a part
Find 12% of 250 pieces.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
75 parts are 12.5% of a batch. How many parts are in the whole batch?
12.5% equals one eighth of the original whole.
Planning step 1 of 3
Of 240 inspected pins, 18 are bent. What PERCENTAGE are bent? Enter the number without %.
Divide part by whole before multiplying by 100.
Planning step 1 of 2
A supply has 240 labels. A first job uses 15% of the ORIGINAL supply and a second uses 22.5% of the ORIGINAL supply. How many labels remain?
The percentages share one denominator, so their used shares can be added.
Planning step 1 of 2
90 parts are 12.5% of a batch. How many parts are in the whole batch?
12.5% equals one eighth of the original whole.
Planning step 1 of 1
Of 320 inspected pins, 24 are bent. What PERCENTAGE are bent? Enter the number without %.
Divide part by whole before multiplying by 100.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
A supply has 280 labels. A first job uses 15% of the ORIGINAL supply and a second uses 22.5% of the ORIGINAL supply. How many labels remain?
105 parts are 12.5% of a batch. How many parts are in the whole batch?
Of 400 inspected pins, 30 are bent. What PERCENTAGE are bent? Enter the number without %.
A supply has 320 labels. A first job uses 15% of the ORIGINAL supply and a second uses 22.5% of the ORIGINAL supply. How many labels remain?
120 parts are 12.5% of a batch. How many parts are in the whole batch?
Video explanation: Percentages of a quantity
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
Percentages Made Easy!
The Organic Chemistry Tutor · YouTube
Practise finding a percentage of a quantity without a calculator. Compare the shortcut with the fraction-over-100 method taught in this section.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.