Ratios, averages & production rates
Keep the order of ratios and distinguish rate from total output.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Useful earlier sections
- Divide quantities into equal groups.
- Convert hours and minutes.
Understand the concept
A ratio compares quantities in a stated order. If red to blue is 48:32, divide both values by 16 to get 3:2. Reversing the labels reverses the ratio. An average distributes a combined quantity equally across the number of observations.
A rate compares different units, such as boxes per hour. Total output = rate × time only when the rate is constant over the stated time. Exclude breaks if the problem asks for working time rather than elapsed time.
Apply the method
For a mean, add every observation then divide by the number of observations. For a constant rate, divide total output by time to obtain output per one time unit.
Convert time into a consistent unit. Ninety minutes is 1.5 hours, not 1.90 hours. Do not average two rates without checking whether their time periods are equal.
Separate ratio shares from simple means
A ratio of 4:7 divides a total into eleven equal ratio parts, not seven. Find the size of one part before multiplying by the required category share. Keep category order visible; reversing the labels reverses the meaning.
For a mean, total = mean × observation count. This makes a missing-output problem an inverse calculation: find the required total and subtract known outputs. A count of hours is the denominator only when the observations are one output per equal hour.
Distinguish working time from elapsed time
A rate found from working minutes should be multiplied by working minutes in a later period. Exclude a stated break. A two-hour elapsed period with a fifteen-minute break contains 105 working minutes, not two full working hours.
State the constant-rate assumption before scaling. If a machine speed changes, split the time into periods and add outputs. The applied lesson extends this to weighted means and combined work rates, where simply averaging numbers often produces an incorrect result.
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
180 boxes in 3 hours, then the same rate for 2 more hours.
- Rate: 180 ÷ 3 = 60 boxes/hour.
- Additional output: 60 × 2 = 120 boxes.
Answer: 120 additional boxes
Worked example 2
Find the average of 8, 10, 6, and 12 kg.
- Total: 8 + 10 + 6 + 12 = 36 kg.
- Four observations: 36 ÷ 4 = 9 kg.
Answer: 9 kg
Worked example 3
Red to blue seals are in ratio 4:7. There are 495 seals altogether. How many are blue?
- Total ratio parts = 4 + 7 = 11.
- One ratio part = 495 ÷ 11 = 45 seals.
- Blue = 7 × 45 = 315 seals.
Answer: 315
Worked example 4
A line makes 300 boxes in 45 working minutes. It then operates at the same rate for a 2-hour period containing a 15-minute break. How many boxes does it make during that later period?
- Later working time = 120 − 15 = 105 minutes.
- Rate = 300 ÷ 45 = 20/3 boxes/minute.
- Later output = 300 × 105/45 = 700 boxes. Do not include the earlier output.
Answer: 700
Common mistakes and checks
The number of observations, not the largest observation, is the denominator of a simple mean.
Check your understanding
- A ratio total is split by the sum of its parts.
- A target mean fixes a required combined total.
- Rate times working time gives output under a constant-rate assumption.
Step 1 of 8 · Understand the task
Choose the correct denominator for the relationship
A ratio compares category quantities in a named order. A mean divides a total by its observation count. A production rate divides output by working time. These are related divisions, but their denominators have different meanings.
Label the denominator before calculating so ratio parts, readings and minutes are not accidentally treated as the same thing.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
Ratio shares and mean totals
For a category ratio, add its parts to represent the total before finding one part. For a missing mean observation, reconstruct the required total as mean×number of observations, then subtract the known observations.
Check your understanding
Match working time to a working-time rate
A rate measured during active work should be applied to active working minutes, not a period containing breaks. Convert hours to minutes before removing a break if the rate uses minutes. A constant-rate assumption is needed for simple scaling.
Check your understanding
Detailed explanation and checks
Useful earlier sections
- Divide quantities into equal groups.
- Convert hours and minutes.
Understand the concept
A ratio compares quantities in a stated order. If red to blue is 48:32, divide both values by 16 to get 3:2. Reversing the labels reverses the ratio. An average distributes a combined quantity equally across the number of observations.
A rate compares different units, such as boxes per hour. Total output = rate × time only when the rate is constant over the stated time. Exclude breaks if the problem asks for working time rather than elapsed time.
Apply the method
For a mean, add every observation then divide by the number of observations. For a constant rate, divide total output by time to obtain output per one time unit.
Convert time into a consistent unit. Ninety minutes is 1.5 hours, not 1.90 hours. Do not average two rates without checking whether their time periods are equal.
Separate ratio shares from simple means
A ratio of 4:7 divides a total into eleven equal ratio parts, not seven. Find the size of one part before multiplying by the required category share. Keep category order visible; reversing the labels reverses the meaning.
For a mean, total = mean × observation count. This makes a missing-output problem an inverse calculation: find the required total and subtract known outputs. A count of hours is the denominator only when the observations are one output per equal hour.
Distinguish working time from elapsed time
A rate found from working minutes should be multiplied by working minutes in a later period. Exclude a stated break. A two-hour elapsed period with a fifteen-minute break contains 105 working minutes, not two full working hours.
State the constant-rate assumption before scaling. If a machine speed changes, split the time into periods and add outputs. The applied lesson extends this to weighted means and combined work rates, where simply averaging numbers often produces an incorrect result.
Common mistakes and checks
The number of observations, not the largest observation, is the denominator of a simple mean.
- A ratio total is split by the sum of its parts.
- A target mean fixes a required combined total.
- Rate times working time gives output under a constant-rate assumption.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
180 boxes in 3 hours, then the same rate for 2 more hours.
- Rate: 180 ÷ 3 = 60 boxes/hour.
- Additional output: 60 × 2 = 120 boxes.
Answer: 120 additional boxes
Worked example 2
Find the average of 8, 10, 6, and 12 kg.
- Total: 8 + 10 + 6 + 12 = 36 kg.
- Four observations: 36 ÷ 4 = 9 kg.
Answer: 9 kg
Worked example 3
Red to blue seals are in ratio 4:7. There are 495 seals altogether. How many are blue?
- Total ratio parts = 4 + 7 = 11.
- One ratio part = 495 ÷ 11 = 45 seals.
- Blue = 7 × 45 = 315 seals.
Answer: 315
Worked example 4
A line makes 300 boxes in 45 working minutes. It then operates at the same rate for a 2-hour period containing a 15-minute break. How many boxes does it make during that later period?
- Later working time = 120 − 15 = 105 minutes.
- Rate = 300 ÷ 45 = 20/3 boxes/minute.
- Later output = 300 × 105/45 = 700 boxes. Do not include the earlier output.
Answer: 700
Explain the worked method
Compare the two conditions
Predict each result from its stated conditions, then compare the explanations. Identify which changed condition makes the difference.
Split a total
Yellow:green items are 3:5 with 64 items altogether.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
Red to blue seals are in ratio 4:7. There are 99 seals altogether. How many are blue?
The total represents eleven ratio parts.
Planning step 1 of 3
Three hourly outputs are 25, 32, and an unknown count. Their mean is 31. What is the unknown count?
A target mean fixes the total output.
Planning step 1 of 2
A line makes 60 boxes in 45 working minutes. It then operates at the same rate for a 2-hour period containing a 15-minute break. How many boxes does it make during that later period?
Later working time excludes the break.
Planning step 1 of 2
Red to blue seals are in ratio 4:7. There are 132 seals altogether. How many are blue?
The total represents eleven ratio parts.
Planning step 1 of 1
Three hourly outputs are 26, 33, and an unknown count. Their mean is 32. What is the unknown count?
A target mean fixes the total output.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
A line makes 75 boxes in 45 working minutes. It then operates at the same rate for a 2-hour period containing a 15-minute break. How many boxes does it make during that later period?
Red to blue seals are in ratio 4:7. There are 165 seals altogether. How many are blue?
Three hourly outputs are 27, 34, and an unknown count. Their mean is 33. What is the unknown count?
A line makes 90 boxes in 45 working minutes. It then operates at the same rate for a 2-hour period containing a 15-minute break. How many boxes does it make during that later period?
Red to blue seals are in ratio 4:7. There are 198 seals altogether. How many are blue?
Video explanation: Ratios, averages & production rates
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
Unit Rates, Ratios & Proportions - Word Problems
The Organic Chemistry Tutor · YouTube
Focus on unit rates: write what each number measures, divide to find a per-unit quantity, then scale to the requested production amount.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.