Reject rates, yield & final quantities
Separate the change, the remaining amount, and the rate.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Useful earlier sections
- Calculate a percentage of a quantity.
- Find an unknown whole from a known share.
Understand the concept
For these exercises, acceptable yield is acceptable pieces divided by total pieces. Reject rate uses rejected pieces divided by that same total. When every piece is either acceptable or rejected, those two percentages add to 100%.
A discount or reject count is an amount removed, not the remaining total. If 20% is removed, 80% remains. A different denominator produces a different rate, so always identify the whole explicitly.
Apply the method
Find acceptable count = total − rejects. Divide acceptable count by the original total and multiply by 100. Read whether the question asks for a count or a percentage.
For a price reduction, discounted price = original price × (1 − discount percentage/100). This is mathematically the same remaining-share method.
Track categories through rework
Initial rejects can later become acceptable after rework. The input batch stays the denominator unless the problem explicitly adds new input. If a quarter of an 8% reject group is recovered, 2% of the original batch moves from rejected to acceptable.
Do not add a recovered percentage directly unless its reference whole is clear. A quarter of rejects is 25% of the reject group, not 25 percentage points of the full batch. Find the recovery count or express both shares relative to the original input.
Combine unequal batches correctly
A large batch contributes more pieces to combined yield than a small batch. Calculate acceptable count for each batch, add these counts, then divide by the combined input. Averaging yield percentages directly is valid only when the input counts are equal.
When an accepted count and yield are given, divide accepted count by the decimal yield to reconstruct input. Check that input is at least accepted count when yield is at most 100%, and that any implied piece count is consistent with whole pieces.
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
Of 240 parts, 12 are rejected. Find yield.
- Acceptable: 240 − 12 = 228.
- 228 ÷ 240 × 100 = 95%.
Answer: 95%
Worked example 2
A ₱250 item has a 20% discount. Find the final price.
- Discount = 250 × 0.20 = ₱50.
- Final price = 250 − 50 = ₱200.
Answer: ₱200
Worked example 3
A batch has 1600 parts. Initially 8% are rejected. Rework recovers one quarter of those rejects. What is the FINAL acceptable yield percentage?
- Initial rejects = 8% × 1600 = 128.
- Recovered = 128 ÷ 4 = 32; final rejects = 96.
- Final reject share = 6%, so acceptable yield = 100% − 6% = 94%.
Answer: 94
Worked example 4
Batch A has 3600 pieces at 95% yield. Batch B has 1800 pieces at 86% yield. What is the combined acceptable yield percentage?
- Acceptable counts: 3420 and 1548.
- Combined = 4968 acceptable out of 5400 input.
- Combined yield = 276/300 × 100 = 92%. The unweighted mean 90.5% ignores different batch sizes.
Answer: 92
Common mistakes and checks
Do not divide rejects by acceptable pieces when the question asks for the reject percentage of the whole batch.
Check your understanding
- Acceptable plus rejected count equals input count.
- Rework changes classification without adding new input.
- Combined yield uses total acceptable divided by total input.
Step 1 of 8 · Understand the task
Track pieces when their classification changes
A reject can become acceptable after rework without creating a new input piece. The original batch count stays the reference whole unless additional input is explicitly introduced.
Find counts first when a question combines batches or recovers a share of rejected pieces.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
Yield uses acceptable count over input count
When acceptable and rejected are the only categories, their counts add to input. A recovered fraction of rejects uses the reject group as its initial base. Calculate that recovery count before updating acceptable pieces and yield.
Check your understanding
Combined yield needs combined counts
For unequal batches, find acceptable pieces in each, add them, and divide by all input pieces. A plain mean of two percentages gives equal weight to the batches even if one contains many more pieces.
Check your understanding
Detailed explanation and checks
Useful earlier sections
- Calculate a percentage of a quantity.
- Find an unknown whole from a known share.
Understand the concept
For these exercises, acceptable yield is acceptable pieces divided by total pieces. Reject rate uses rejected pieces divided by that same total. When every piece is either acceptable or rejected, those two percentages add to 100%.
A discount or reject count is an amount removed, not the remaining total. If 20% is removed, 80% remains. A different denominator produces a different rate, so always identify the whole explicitly.
Apply the method
Find acceptable count = total − rejects. Divide acceptable count by the original total and multiply by 100. Read whether the question asks for a count or a percentage.
For a price reduction, discounted price = original price × (1 − discount percentage/100). This is mathematically the same remaining-share method.
Track categories through rework
Initial rejects can later become acceptable after rework. The input batch stays the denominator unless the problem explicitly adds new input. If a quarter of an 8% reject group is recovered, 2% of the original batch moves from rejected to acceptable.
Do not add a recovered percentage directly unless its reference whole is clear. A quarter of rejects is 25% of the reject group, not 25 percentage points of the full batch. Find the recovery count or express both shares relative to the original input.
Combine unequal batches correctly
A large batch contributes more pieces to combined yield than a small batch. Calculate acceptable count for each batch, add these counts, then divide by the combined input. Averaging yield percentages directly is valid only when the input counts are equal.
When an accepted count and yield are given, divide accepted count by the decimal yield to reconstruct input. Check that input is at least accepted count when yield is at most 100%, and that any implied piece count is consistent with whole pieces.
Common mistakes and checks
Do not divide rejects by acceptable pieces when the question asks for the reject percentage of the whole batch.
- Acceptable plus rejected count equals input count.
- Rework changes classification without adding new input.
- Combined yield uses total acceptable divided by total input.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
Of 240 parts, 12 are rejected. Find yield.
- Acceptable: 240 − 12 = 228.
- 228 ÷ 240 × 100 = 95%.
Answer: 95%
Worked example 2
A ₱250 item has a 20% discount. Find the final price.
- Discount = 250 × 0.20 = ₱50.
- Final price = 250 − 50 = ₱200.
Answer: ₱200
Worked example 3
A batch has 1600 parts. Initially 8% are rejected. Rework recovers one quarter of those rejects. What is the FINAL acceptable yield percentage?
- Initial rejects = 8% × 1600 = 128.
- Recovered = 128 ÷ 4 = 32; final rejects = 96.
- Final reject share = 6%, so acceptable yield = 100% − 6% = 94%.
Answer: 94
Worked example 4
Batch A has 3600 pieces at 95% yield. Batch B has 1800 pieces at 86% yield. What is the combined acceptable yield percentage?
- Acceptable counts: 3420 and 1548.
- Combined = 4968 acceptable out of 5400 input.
- Combined yield = 276/300 × 100 = 92%. The unweighted mean 90.5% ignores different batch sizes.
Answer: 92
Explain the worked method
Compare the two conditions
Predict each result from its stated conditions, then compare the explanations. Identify which changed condition makes the difference.
Before rework
There are 500 input pieces and 40 initial rejects.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
A batch has 400 parts. Initially 8% are rejected. Rework recovers one quarter of those rejects. What is the FINAL acceptable yield percentage?
Recovered rejects become acceptable; they are not a new batch.
Planning step 1 of 3
A batch yields 138 acceptable pieces at a 92% acceptable yield. What was the total input count?
The accepted count is the part, not the denominator.
Planning step 1 of 2
Batch A has 400 pieces at 95% yield. Batch B has 200 pieces at 86% yield. What is the combined acceptable yield percentage?
Weight each yield by its batch size.
Planning step 1 of 2
A batch has 500 parts. Initially 8% are rejected. Rework recovers one quarter of those rejects. What is the FINAL acceptable yield percentage?
Recovered rejects become acceptable; they are not a new batch.
Planning step 1 of 1
A batch yields 184 acceptable pieces at a 92% acceptable yield. What was the total input count?
The accepted count is the part, not the denominator.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
Batch A has 600 pieces at 95% yield. Batch B has 300 pieces at 86% yield. What is the combined acceptable yield percentage?
A batch has 600 parts. Initially 8% are rejected. Rework recovers one quarter of those rejects. What is the FINAL acceptable yield percentage?
A batch yields 230 acceptable pieces at a 92% acceptable yield. What was the total input count?
Batch A has 800 pieces at 95% yield. Batch B has 400 pieces at 86% yield. What is the combined acceptable yield percentage?
A batch has 700 parts. Initially 8% are rejected. Rework recovers one quarter of those rejects. What is the FINAL acceptable yield percentage?
Video explanation: Reject rates, yield & final quantities
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
Percentages Made Easy!
The Organic Chemistry Tutor · YouTube
Apply the percentage method to accepted and rejected quantities. State the original total clearly so you do not use the wrong denominator.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.