Percentages, yields & unit conversions
Calculate percentages and production rates, then convert and combine measurements correctly.
Connect percentages, output and measurement units
A percentage is a share out of one hundred. A reject rate of 4% means four rejects for every hundred items in the stated total; it does not mean four rejects regardless of batch size. Yield is the share of input counted as good output under the question’s definitions. The denominator matters: rejects divided by input gives a different percentage from rejects divided by good output. A ratio compares quantities in order; an average or production rate divides a total by a count or time.
Before calculating, label the part, the whole and their units. Find a percentage of a quantity by multiplying the whole by the percentage divided by 100. Find a rate by dividing the appropriate quantities, keeping the resulting unit, such as pieces per hour. Convert unlike measurement units before combining values: 1,000 millilitres and one litre describe the same volume. These methods help interpret sample questions about batches, rejected pieces, filling, packing and shift output. A final check should confirm that good pieces plus rejects recover the input when those are the only two categories.
What you will learn
- Identify the correct whole before finding a percentage or yield.
- Relate input, good output and rejects without changing the denominator.
- Convert compatible units and calculate basic ratios, averages and production rates.
Calculate good output from rejects
A batch contains 750 pieces, including 30 rejects. All other pieces are good. Find good output and yield.
Good output is 750 − 30 = 720 pieces. Yield uses the input as the whole: 720 ÷ 750 × 100 = 96%. The check is 720 good + 30 rejects = 750 input.
Section assessments are untimed: 8 out of 10 records a pass. After passing every section, the mixed final requires 16 out of 20. These are website learning thresholds.
Begin first sectionSection learning objectives
- Percentages of a quantity
Interpret a percentage as a fraction out of 100.
- Reject rates, yield & final quantities
Separate the change, the remaining amount, and the rate.
- Metric conversions & compatible units
Convert length, mass, and volume before combining quantities.
- Ratios, averages & production rates
Keep the order of ratios and distinguish rate from total output.