Adding and subtracting fractions
Use a common denominator to combine equal-sized parts.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Useful earlier sections
- Find equivalent fractions.
- Convert mixed quantities to improper fractions.
Understand the concept
You can add numerators directly only when the denominators match. Thirds and sixths are different-sized parts, just as metres and centimetres are different units. Convert them into a common part size first.
A common denominator is a multiple of both denominators. The least common denominator is often convenient but not required; any common denominator works if you convert correctly and simplify the result.
Apply the method
Find a common denominator, scale each numerator and denominator by the appropriate factor, then add or subtract the numerators. Keep the common denominator and reduce the final fraction.
Check magnitude. Adding positive fractions must increase the total; subtracting a smaller positive fraction must decrease it.
Combine three or more shares exactly
A common denominator must fit every fraction in the expression. With sixths, eighths and quarters, twenty-fourths work for all three. Convert each numerator separately, retain each sign, then calculate the signed numerator total over the unchanged denominator.
The least common denominator reduces arithmetic but is not compulsory. A larger valid common denominator leads to the same value after simplification. Adding denominators does not represent the same sized pieces and is never the addition rule.
Subtract measurements and retain their reference unit
For a stock length with a mixed fraction, converting the entire measurement to an improper fraction avoids informal borrowing. A metre is still the reference unit even when the final numerator exceeds its denominator.
Check which whole each fraction refers to. Shares of one standard drum can be added as measurements; a share of the current remaining stock cannot be combined directly with a share of the original stock. Negative net changes are possible, but a physical amount remaining must respect the available starting quantity.
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
Calculate 1/3 + 1/6.
- 1/3 = 2/6.
- 2/6 + 1/6 = 3/6.
- Reduce 3/6 to 1/2.
Answer: 1/2
Worked example 2
Calculate 3/4 − 1/2.
- 1/2 = 2/4.
- 3/4 − 2/4 = 1/4.
Answer: 1/4
Worked example 3
Find 15/6 + 5/8 − 1/4. Enter an exact fraction or decimal.
- 15/6 = 60/24; 5/8 = 15/24; 1/4 = 6/24.
- Combine numerators: 60 + 15 − 6 = 69.
- The result is 23/8; the denominator stays 24 before simplification.
Answer: 23/8
Worked example 4
A process adds 18/5 of a standard drum of liquid and then 1/6 of a standard drum. It removes 1/10 of a standard drum. What net fraction of ONE standard drum was added? Enter an exact fraction or decimal. The receiving reservoir is large enough.
- Common denominator 30: 108/30 + 5/30 − 3/30.
- Net numerator = 108 + 5 − 3 = 110.
- Net addition = 11/3 of one drum. It can exceed one drum because the receiving reservoir is larger.
Answer: 11/3
Common mistakes and checks
Adding denominators creates a new part size and is not the rule for fraction addition.
Check your understanding
- Convert every term to a common part size.
- Keep the common denominator while combining signed numerators.
- Simplify or convert only after the exact calculation.
Step 1 of 8 · Understand the task
Combine equal-sized fraction parts
Adding halves to thirds is like combining measurements written on different scales. First express both amounts as the same-sized parts, then add or subtract their counts.
For a stock length, convert any whole-number part too. Keep the metre or drum reference consistent throughout the calculation.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
Use a common denominator
Choose a denominator divisible by all the original denominators. Multiply each numerator and denominator by its required factor. Only then combine numerators, preserving every plus or minus sign; the shared denominator stays unchanged.
Check your understanding
Mixed numbers and net amounts need consistent units
A mixed length such as 2+1/3 m is 7/3 m. For liquid added and removed relative to one standard drum, add incoming shares and subtract outgoing shares. A net amount may exceed one drum when the receiving reservoir is larger.
Check your understanding
Detailed explanation and checks
Useful earlier sections
- Find equivalent fractions.
- Convert mixed quantities to improper fractions.
Understand the concept
You can add numerators directly only when the denominators match. Thirds and sixths are different-sized parts, just as metres and centimetres are different units. Convert them into a common part size first.
A common denominator is a multiple of both denominators. The least common denominator is often convenient but not required; any common denominator works if you convert correctly and simplify the result.
Apply the method
Find a common denominator, scale each numerator and denominator by the appropriate factor, then add or subtract the numerators. Keep the common denominator and reduce the final fraction.
Check magnitude. Adding positive fractions must increase the total; subtracting a smaller positive fraction must decrease it.
Combine three or more shares exactly
A common denominator must fit every fraction in the expression. With sixths, eighths and quarters, twenty-fourths work for all three. Convert each numerator separately, retain each sign, then calculate the signed numerator total over the unchanged denominator.
The least common denominator reduces arithmetic but is not compulsory. A larger valid common denominator leads to the same value after simplification. Adding denominators does not represent the same sized pieces and is never the addition rule.
Subtract measurements and retain their reference unit
For a stock length with a mixed fraction, converting the entire measurement to an improper fraction avoids informal borrowing. A metre is still the reference unit even when the final numerator exceeds its denominator.
Check which whole each fraction refers to. Shares of one standard drum can be added as measurements; a share of the current remaining stock cannot be combined directly with a share of the original stock. Negative net changes are possible, but a physical amount remaining must respect the available starting quantity.
Common mistakes and checks
Adding denominators creates a new part size and is not the rule for fraction addition.
- Convert every term to a common part size.
- Keep the common denominator while combining signed numerators.
- Simplify or convert only after the exact calculation.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
Calculate 1/3 + 1/6.
- 1/3 = 2/6.
- 2/6 + 1/6 = 3/6.
- Reduce 3/6 to 1/2.
Answer: 1/2
Worked example 2
Calculate 3/4 − 1/2.
- 1/2 = 2/4.
- 3/4 − 2/4 = 1/4.
Answer: 1/4
Worked example 3
Find 15/6 + 5/8 − 1/4. Enter an exact fraction or decimal.
- 15/6 = 60/24; 5/8 = 15/24; 1/4 = 6/24.
- Combine numerators: 60 + 15 − 6 = 69.
- The result is 23/8; the denominator stays 24 before simplification.
Answer: 23/8
Worked example 4
A process adds 18/5 of a standard drum of liquid and then 1/6 of a standard drum. It removes 1/10 of a standard drum. What net fraction of ONE standard drum was added? Enter an exact fraction or decimal. The receiving reservoir is large enough.
- Common denominator 30: 108/30 + 5/30 − 3/30.
- Net numerator = 108 + 5 − 3 = 110.
- Net addition = 11/3 of one drum. It can exceed one drum because the receiving reservoir is larger.
Answer: 11/3
Explain the worked method
Compare the two conditions
Predict each result from its stated conditions, then compare the explanations. Identify which changed condition makes the difference.
Addition
Add 2/3 and 1/6 of the same whole.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
Find 3/6 + 5/8 − 1/4. Enter an exact fraction or decimal.
Use denominator 24 for all three terms.
Planning step 1 of 3
A stock length is 5 + 1/3 metres. Two cuts use 1 + 3/4 metres and 5/6 metre. What length remains in metres? Enter an exact fraction or decimal.
Convert mixed quantities and use twelfths.
Planning step 1 of 2
A process adds 2/5 of a standard drum of liquid and then 1/6 of a standard drum. It removes 1/10 of a standard drum. What net fraction of ONE standard drum was added? Enter an exact fraction or decimal. The receiving reservoir is large enough.
Every fraction refers to the same fixed standard drum.
Planning step 1 of 2
Find 4/6 + 5/8 − 1/4. Enter an exact fraction or decimal.
Use denominator 24 for all three terms.
Planning step 1 of 1
A stock length is 6 + 1/3 metres. Two cuts use 1 + 3/4 metres and 5/6 metre. What length remains in metres? Enter an exact fraction or decimal.
Convert mixed quantities and use twelfths.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
A process adds 3/5 of a standard drum of liquid and then 1/6 of a standard drum. It removes 1/10 of a standard drum. What net fraction of ONE standard drum was added? Enter an exact fraction or decimal. The receiving reservoir is large enough.
Find 5/6 + 5/8 − 1/4. Enter an exact fraction or decimal.
A stock length is 7 + 1/3 metres. Two cuts use 1 + 3/4 metres and 5/6 metre. What length remains in metres? Enter an exact fraction or decimal.
A process adds 4/5 of a standard drum of liquid and then 1/6 of a standard drum. It removes 1/10 of a standard drum. What net fraction of ONE standard drum was added? Enter an exact fraction or decimal. The receiving reservoir is large enough.
Find 6/6 + 5/8 − 1/4. Enter an exact fraction or decimal.
Video explanation: Adding and subtracting fractions
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
Fractions Basic Introduction - Adding, Subtracting, Multiplying & Dividing Fractions
The Organic Chemistry Tutor · YouTube
Pause at addition and subtraction examples. Find a common denominator and explain why only the numerators are combined afterward.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.