Decimal place value & rounding
Read tenths, hundredths, and thousandths and round at the requested position.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Useful earlier sections
- Identify tenths, hundredths and thousandths.
- Regroup across a whole-number boundary.
Understand the concept
Digits to the right of the decimal point represent tenths, hundredths, thousandths, and so on. In 2.375, 3 is tenths, 7 is hundredths, and 5 is thousandths. Trailing zeros do not change value: 2.50 equals 2.5.
To compare decimals, align their decimal points and add trailing zeros mentally. 0.8 = 0.80, which is greater than 0.75 even though 75 is larger than 8 as a whole number.
Apply the method
For rounding, locate the last digit you want to keep and inspect the next digit. In these exercises use the usual school rule: 0–4 leaves the kept digit unchanged, 5–9 increases it by one.
Round at the end of a multi-step calculation unless instructed otherwise. Rounding intermediate values can accumulate error, especially when converting units or dividing.
Rounding is a specified operation
These lessons use the school convention that a next digit of 5 through 9 rounds the last retained digit upward for nonnegative values. State the requested precision: two decimal places means hundredths, while the nearest ten means a place to the left of the decimal point.
A value ending .995 rounded to hundredths carries through both 9s and into the whole-number part. Writing the final value with .00 can communicate the requested precision, although the numeric input also accepts the equal whole number.
Avoid early rounding and false ordering
Adding two rounded measurements can differ from rounding their exact sum. Unless the problem instructs you to round inputs first, retain their given digits, complete the calculation, then round once. This matters when many small errors accumulate.
For comparison, append trailing zeros rather than moving the decimal point. 6.8 becomes 6.800, which can be compared column by column with 6.108 and 6.080. More decimal digits describe finer precision; they do not automatically describe a greater value.
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
Round 12.376 to two decimal places.
- Keep the hundredths digit, 7.
- The next digit is 6, so increase 7 to 8.
Answer: 12.38
Worked example 2
Compare 0.8 and 0.75.
- Write 0.8 as 0.80.
- 80 hundredths exceeds 75 hundredths.
Answer: 0.8 is larger
Worked example 3
A measured total is 24.995 kg. Round the TOTAL to two decimal places using 5 rounds up.
- The hundredths digit is 9 and the next digit is 5.
- Increasing the hundredths produces 100 hundredths, adding one whole kilogram.
- The rounded total is 25.00 kg; enter 25.
Answer: 25
Worked example 4
Three gauge readings are 21.08, 21.8, and 21.108 mm. What is the largest reading minus the smallest, in mm?
- Aligned readings: 21.080, 21.800, 21.108.
- Largest is 21.800; smallest is 21.080.
- Their difference is 0.720 = 0.72 mm; digit count alone cannot rank decimals.
Answer: 0.72
Common mistakes and checks
The number of digits after a decimal does not determine which decimal is larger.
Check your understanding
- Align decimal places to compare readings.
- Use the digit immediately after the requested position.
- Calculate exactly first and round the final answer once.
Step 1 of 8 · Understand the task
Keep measurement precision separate from measurement size
The positions after a decimal point name tenths, hundredths and smaller parts. Adding a trailing zero does not change a measurement; moving a digit to another place does.
Rounding replaces a value with a nearby value at the requested precision. Calculate a requested total first when the instruction says to round the total.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
Align place values before comparing or adding
Write compatible decimals with the same number of places when helpful. Compare whole parts first, then tenths, hundredths and so on. For addition, decimal points align so each place combines with the same-sized unit.
Check your understanding
Use the first discarded digit and allow a carry
To round to hundredths, examine the thousandths digit. Under the stated 5-rounds-up rule,5 or more increases the hundredths by one. A run of 9 s can carry into the whole-number part. Keep exact intermediate sums until the requested rounding stage.
Check your understanding
Detailed explanation and checks
Useful earlier sections
- Identify tenths, hundredths and thousandths.
- Regroup across a whole-number boundary.
Understand the concept
Digits to the right of the decimal point represent tenths, hundredths, thousandths, and so on. In 2.375, 3 is tenths, 7 is hundredths, and 5 is thousandths. Trailing zeros do not change value: 2.50 equals 2.5.
To compare decimals, align their decimal points and add trailing zeros mentally. 0.8 = 0.80, which is greater than 0.75 even though 75 is larger than 8 as a whole number.
Apply the method
For rounding, locate the last digit you want to keep and inspect the next digit. In these exercises use the usual school rule: 0–4 leaves the kept digit unchanged, 5–9 increases it by one.
Round at the end of a multi-step calculation unless instructed otherwise. Rounding intermediate values can accumulate error, especially when converting units or dividing.
Rounding is a specified operation
These lessons use the school convention that a next digit of 5 through 9 rounds the last retained digit upward for nonnegative values. State the requested precision: two decimal places means hundredths, while the nearest ten means a place to the left of the decimal point.
A value ending .995 rounded to hundredths carries through both 9s and into the whole-number part. Writing the final value with .00 can communicate the requested precision, although the numeric input also accepts the equal whole number.
Avoid early rounding and false ordering
Adding two rounded measurements can differ from rounding their exact sum. Unless the problem instructs you to round inputs first, retain their given digits, complete the calculation, then round once. This matters when many small errors accumulate.
For comparison, append trailing zeros rather than moving the decimal point. 6.8 becomes 6.800, which can be compared column by column with 6.108 and 6.080. More decimal digits describe finer precision; they do not automatically describe a greater value.
Common mistakes and checks
The number of digits after a decimal does not determine which decimal is larger.
- Align decimal places to compare readings.
- Use the digit immediately after the requested position.
- Calculate exactly first and round the final answer once.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
Round 12.376 to two decimal places.
- Keep the hundredths digit, 7.
- The next digit is 6, so increase 7 to 8.
Answer: 12.38
Worked example 2
Compare 0.8 and 0.75.
- Write 0.8 as 0.80.
- 80 hundredths exceeds 75 hundredths.
Answer: 0.8 is larger
Worked example 3
A measured total is 24.995 kg. Round the TOTAL to two decimal places using 5 rounds up.
- The hundredths digit is 9 and the next digit is 5.
- Increasing the hundredths produces 100 hundredths, adding one whole kilogram.
- The rounded total is 25.00 kg; enter 25.
Answer: 25
Worked example 4
Three gauge readings are 21.08, 21.8, and 21.108 mm. What is the largest reading minus the smallest, in mm?
- Aligned readings: 21.080, 21.800, 21.108.
- Largest is 21.800; smallest is 21.080.
- Their difference is 0.720 = 0.72 mm; digit count alone cannot rank decimals.
Answer: 0.72
Explain the worked method
Compare the two conditions
Predict each result from its stated conditions, then compare the explanations. Identify which changed condition makes the difference.
Round before addition
Round 1.246 and 1.246 separately to two decimals, then add.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
A measured total is 12.995 kg. Round the TOTAL to two decimal places using 5 rounds up.
Rounding can carry across several 9s.
Planning step 1 of 3
Two measurements are 3.246 m and 2.246 m. Add them exactly, THEN round to two decimals using 5 rounds up. What is the rounded sum in metres?
Premature rounding can change the sum.
Planning step 1 of 2
Three gauge readings are 5.08, 5.8, and 5.108 mm. What is the largest reading minus the smallest, in mm?
Append zeros so the same place values line up.
Planning step 1 of 2
A measured total is 13.995 kg. Round the TOTAL to two decimal places using 5 rounds up.
Rounding can carry across several 9s.
Planning step 1 of 1
Two measurements are 4.246 m and 3.246 m. Add them exactly, THEN round to two decimals using 5 rounds up. What is the rounded sum in metres?
Premature rounding can change the sum.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
Three gauge readings are 6.08, 6.8, and 6.108 mm. What is the largest reading minus the smallest, in mm?
A measured total is 14.995 kg. Round the TOTAL to two decimal places using 5 rounds up.
Two measurements are 5.246 m and 4.246 m. Add them exactly, THEN round to two decimals using 5 rounds up. What is the rounded sum in metres?
Three gauge readings are 7.08, 7.8, and 7.108 mm. What is the largest reading minus the smallest, in mm?
A measured total is 15.995 kg. Round the TOTAL to two decimal places using 5 rounds up.
Video explanation: Decimal place value & rounding
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
Math - Decimal Arithmetic
The Organic Chemistry Tutor · YouTube
Review how decimal positions affect calculations. Compare tenths and hundredths before working through the arithmetic examples.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.