Calculating with decimal measurements
Align decimal values and check decimal-point placement.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Useful earlier sections
- Use decimal place value.
- Interpret a quotient and remainder.
Understand the concept
For decimal addition and subtraction, align decimal points so the same place values share columns. Append zeros when needed: 1.2 can be written as 1.20. Do not align the last digit if that misaligns the decimal points.
For multiplication, you can calculate with whole-number digits and then restore the combined number of decimal places. Always estimate to detect a decimal point placed one or two columns away.
Apply the method
For 1.25 × 4, calculate 125 × 4 = 500, then place two decimal digits: 5.00. For decimal division, multiply both dividend and divisor by the same power of 10 until the divisor is a whole number: 1.2 ÷ 0.3 = 12 ÷ 3. Multiplying both by the same factor preserves the quotient.
Keep units attached. Adding 1.2 kg and 350 g requires conversion first; aligning decimal points alone cannot make unlike units compatible.
Separate repeated amounts from one-time amounts
A packet mass is multiplied by the number of packets. An outer-box mass is then added once. Gross mass includes contents and packaging; net contents mass excludes packaging. The words determine the expression before any decimal calculation.
The same structure applies to unit prices: price per litre × litres + one container charge. Adding the container fee to the per-litre rate before multiplying would charge for it repeatedly. Units make the mistake visible.
Use decimal division with physical constraints
For a coil trimmed before cutting, remove the unusable trim first. Divide the remaining length by length per piece. An exact decimal quotient may still need interpretation: only its whole part counts full pieces, while a storage-capacity problem can require rounding up.
Move the decimal in both dividend and divisor by the same number of places to obtain a whole-number divisor. Estimate before calculating. Dividing by 0.8 should give a result larger than the original number, because each group is smaller than one unit.
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
Calculate 1.20 − 0.35.
- Align decimal points.
- Borrow one tenth as ten hundredths.
- 120 hundredths − 35 hundredths = 85 hundredths.
Answer: 0.85
Worked example 2
Calculate 2.5 × 0.4.
- 25 × 4 = 100.
- There are two decimal places altogether.
- 100 becomes 1.00; about a third of 2.5 being near 1 is plausible.
Answer: 1
Worked example 3
A coil contains 18.25 m of wire. After trimming 0.45 m, cut pieces of 0.8 m. How many FULL pieces can be made?
- Usable wire = 18.25 − 0.45 = 17.8 m.
- Quotient = 17.8 ÷ 0.8 = 22.25.
- Only whole pieces count: 22. A remaining fraction of 0.8 m is not another full piece.
Answer: 22
Worked example 4
A liquid costs ₱35.40 per litre. A purchase uses 2.5 litres and a ₱3.75 container. What is the exact total cost in pesos?
- Liquid cost = 35.40 × 2.5 = ₱88.5.
- The container adds ₱3.75 once, rather than per litre.
- Total = ₱92.25; no intermediate rounding is required.
Answer: 92.25
Common mistakes and checks
A long string of zeros is not a reason to move the decimal point arbitrarily.
Check your understanding
- Subtract unusable material before dividing.
- Multiply unit cost or mass by count before adding one-time charges.
- Check decimal location by estimating scale.
Step 1 of 8 · Understand the task
Separate repeated quantities from one-time amounts
A packet mass is repeated for every packet, while an outer carton’s mass is added once. Likewise, a container charge is not a price per litre.
Write the quantity relationship before working on decimal digits. For cutting stock, remove unusable trim before deciding how many whole pieces fit.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
Units define each repeated amount
Price per litre times litres gives a liquid cost; packet mass times packet count gives contents mass. Add a one-time charge or packaging amount only after calculating the repeated subtotal, keeping compatible output units.
Check your understanding
A quotient still needs a physical interpretation
After subtracting trim, divide usable length by input length per finished piece. The whole-number part counts full pieces. A remaining length smaller than one full piece cannot be shipped as a complete additional piece.
Check your understanding
Detailed explanation and checks
Useful earlier sections
- Use decimal place value.
- Interpret a quotient and remainder.
Understand the concept
For decimal addition and subtraction, align decimal points so the same place values share columns. Append zeros when needed: 1.2 can be written as 1.20. Do not align the last digit if that misaligns the decimal points.
For multiplication, you can calculate with whole-number digits and then restore the combined number of decimal places. Always estimate to detect a decimal point placed one or two columns away.
Apply the method
For 1.25 × 4, calculate 125 × 4 = 500, then place two decimal digits: 5.00. For decimal division, multiply both dividend and divisor by the same power of 10 until the divisor is a whole number: 1.2 ÷ 0.3 = 12 ÷ 3. Multiplying both by the same factor preserves the quotient.
Keep units attached. Adding 1.2 kg and 350 g requires conversion first; aligning decimal points alone cannot make unlike units compatible.
Separate repeated amounts from one-time amounts
A packet mass is multiplied by the number of packets. An outer-box mass is then added once. Gross mass includes contents and packaging; net contents mass excludes packaging. The words determine the expression before any decimal calculation.
The same structure applies to unit prices: price per litre × litres + one container charge. Adding the container fee to the per-litre rate before multiplying would charge for it repeatedly. Units make the mistake visible.
Use decimal division with physical constraints
For a coil trimmed before cutting, remove the unusable trim first. Divide the remaining length by length per piece. An exact decimal quotient may still need interpretation: only its whole part counts full pieces, while a storage-capacity problem can require rounding up.
Move the decimal in both dividend and divisor by the same number of places to obtain a whole-number divisor. Estimate before calculating. Dividing by 0.8 should give a result larger than the original number, because each group is smaller than one unit.
Common mistakes and checks
A long string of zeros is not a reason to move the decimal point arbitrarily.
- Subtract unusable material before dividing.
- Multiply unit cost or mass by count before adding one-time charges.
- Check decimal location by estimating scale.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
Calculate 1.20 − 0.35.
- Align decimal points.
- Borrow one tenth as ten hundredths.
- 120 hundredths − 35 hundredths = 85 hundredths.
Answer: 0.85
Worked example 2
Calculate 2.5 × 0.4.
- 25 × 4 = 100.
- There are two decimal places altogether.
- 100 becomes 1.00; about a third of 2.5 being near 1 is plausible.
Answer: 1
Worked example 3
A coil contains 18.25 m of wire. After trimming 0.45 m, cut pieces of 0.8 m. How many FULL pieces can be made?
- Usable wire = 18.25 − 0.45 = 17.8 m.
- Quotient = 17.8 ÷ 0.8 = 22.25.
- Only whole pieces count: 22. A remaining fraction of 0.8 m is not another full piece.
Answer: 22
Worked example 4
A liquid costs ₱35.40 per litre. A purchase uses 2.5 litres and a ₱3.75 container. What is the exact total cost in pesos?
- Liquid cost = 35.40 × 2.5 = ₱88.5.
- The container adds ₱3.75 once, rather than per litre.
- Total = ₱92.25; no intermediate rounding is required.
Answer: 92.25
Explain the worked method
Compare the two conditions
Predict each result from its stated conditions, then compare the explanations. Identify which changed condition makes the difference.
Usable length
A coil has 4.8 m and 0.3 m is unusable; full pieces need 0.7 m.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
A coil contains 6.25 m of wire. After trimming 0.45 m, cut pieces of 0.8 m. How many FULL pieces can be made?
Subtract the trim, then round the usable quotient down.
Planning step 1 of 3
A shipment has 7 packets of 0.125 kg and an empty outer box of 0.35 kg. What is its gross mass in kg?
Gross mass includes the container once.
Planning step 1 of 2
A liquid costs ₱19.40 per litre. A purchase uses 2.5 litres and a ₱3.75 container. What is the exact total cost in pesos?
Multiply the unit price by volume before adding the container.
Planning step 1 of 2
A coil contains 7.25 m of wire. After trimming 0.45 m, cut pieces of 0.8 m. How many FULL pieces can be made?
Subtract the trim, then round the usable quotient down.
Planning step 1 of 1
A shipment has 8 packets of 0.125 kg and an empty outer box of 0.35 kg. What is its gross mass in kg?
Gross mass includes the container once.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
A liquid costs ₱20.40 per litre. A purchase uses 2.5 litres and a ₱3.75 container. What is the exact total cost in pesos?
A coil contains 8.25 m of wire. After trimming 0.45 m, cut pieces of 0.8 m. How many FULL pieces can be made?
A shipment has 9 packets of 0.125 kg and an empty outer box of 0.35 kg. What is its gross mass in kg?
A liquid costs ₱21.40 per litre. A purchase uses 2.5 litres and a ₱3.75 container. What is the exact total cost in pesos?
A coil contains 9.25 m of wire. After trimming 0.45 m, cut pieces of 0.8 m. How many FULL pieces can be made?
Video explanation: Calculating with decimal measurements
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
Math - Decimal Arithmetic
The Organic Chemistry Tutor · YouTube
Practise lining up decimal places for addition and subtraction, then check the placement of the decimal point in multiplication and division.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.