Serial numbers and exact matches
Detect substitutions, transpositions, omissions, and repeated characters.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Useful earlier sections
- Read the stated task and identify what the evidence can support.
Understand the concept
An exact match requires the same character in every position. Two codes can contain the same digits and still be different when their positions change. A transposition swaps characters, such as 41 becoming 14.
Chunk long codes into meaningful groups: XC / 99841 / A. Compare group by group, then position by position inside the first differing group. This reduces reliance on the overall visual impression.
Use a repeatable method
Read the reference first, then compare from left to right. One confirmed mismatch is enough to establish “different”, but deciding “same” requires checking every position.
Do not rearrange characters mentally, ignore a separator, or assume letter case is irrelevant unless the matching rules say so.
Set the comparison scope before scanning
An exact match means the same characters in the same positions under the stated rules. Begin with the field boundaries: prefix, numeric part, suffix and separators. Compare corresponding characters rather than reading one whole code and trying to remember it. Memory tends to normalize familiar-looking patterns and can quietly substitute a digit or swap two positions.
Whole-record and field-specific checks are different tasks. If only the six-digit lot field matters, a different prefix may be irrelevant. If case and punctuation matter, every hyphen and lowercase letter counts. Mark an unclear character for the permitted review process instead of treating uncertainty as a match. A second pass should target the known risk, such as adjacent transpositions or an O/0 substitution, rather than merely rereading at the same speed.
| Scope | What must match |
|---|---|
| Full code | Every character, separator and position |
| Named field only | That field; ignore differences outside the stated scope |
| First mismatch | Stop only after confirming the first differing position |
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
Compare XC-99841-A and XC-99814-A.
- 41 and 14 exchange positions, so the complete strings differ.
- Apply the stated rule to the evidence. The answer is Different.
Answer: Different
Worked example 2
Compare TX-4827-B and TX-4827-B.
- Every character appears in the same position.
- Apply the stated rule to the evidence. The answer is Same.
Answer: Same
Worked example 3
Compare record and master by ID, not row position. Which ID has the wrong quantity?
| List | ID | Quantity |
|---|---|---|
| Master | A 2 | 25 |
| Master | B 4 | 18 |
| Master | C 7 | 41 |
| Record | C 7 | 41 |
| Record | A 2 | 25 |
| Record | B 4 | 81 |
- Join each record to the master with the same ID.
- Different row order does not change the required quantity.
- B 4 has 81 instead of 18; C 7 correctly has 41.
Answer: B 4
Worked example 4
Compare these two sources: signed master AB-8362; unsigned note AB-8362. The rule requires the SIGNED master, with unresolved characters sent to review. What is justified?
- Use the authorized reference, not whichever source is clearer.
- A question mark records unavailable evidence.
- The signed value is fully legible and matches.
Answer: Confirm AB-8362 against the signed master
Common mistakes and checks
Do not rearrange characters mentally, ignore a separator, or assume letter case is irrelevant unless the matching rules say so.
Check your understanding
- State the scope, then compare position by position.
- Explain why the tempting shortcut does not establish the required result.
Step 1 of 8 · Understand the task
An almost matching code can identify a different record
A transposed pair of digits or a missing leading zero may be easy to overlook when a reference looks familiar. In an exact comparison, every required character matters, including punctuation and case.
Start by reading the comparison rule. Some tasks compare the whole code; others deliberately ignore a field or normalize a permitted difference. Apply that rule consistently instead of silently correcting the text into what you expect.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
Define the comparison scope and normalization
Scope means which fields the task requires you to compare. A six-digit lot-field comparison ignores prefixes if the instruction says to do so. A complete-code comparison includes those prefixes, suffixes and separators.
Normalization is a permitted change made before comparing, such as removing spaces. Ignore only the differences explicitly allowed. Permission to remove spaces does not also permit removing hyphens, changing case or dropping a leading zero.
Check your understanding
Compare corresponding positions rather than familiar chunks
When the question counts every character, number positions from one and include separators. Compare each position in the reference with the same position in the candidate. A first-mismatch question stops at the earliest difference; an all-mismatches question must finish the full string.
Similar-looking characters remain distinct: zero and letter O, one and letter I, S and digit 5. Retain leading zeros when the scheme requires them; the numerical values 7 and 07 may be equal in arithmetic while their code fields are different.
Check your understanding
Use the required source and effective version
A master-list entry can be valid yet wrong for the assigned order. Match records by their required ID or field key, not by row position after a table is sorted. If a reference changes at a stated time, use the version effective for the event the instruction names.
An unclear signed master does not become certain because an unsigned note is easy to read. Preserve uncertainty and use the authorized review route. Do not invent a missing character or count an unresolved entry as verified.
Check your understanding
Detailed explanation and checks
Useful earlier sections
- Read the stated task and identify what the evidence can support.
Understand the concept
An exact match requires the same character in every position. Two codes can contain the same digits and still be different when their positions change. A transposition swaps characters, such as 41 becoming 14.
Chunk long codes into meaningful groups: XC / 99841 / A. Compare group by group, then position by position inside the first differing group. This reduces reliance on the overall visual impression.
Use a repeatable method
Read the reference first, then compare from left to right. One confirmed mismatch is enough to establish “different”, but deciding “same” requires checking every position.
Do not rearrange characters mentally, ignore a separator, or assume letter case is irrelevant unless the matching rules say so.
Set the comparison scope before scanning
An exact match means the same characters in the same positions under the stated rules. Begin with the field boundaries: prefix, numeric part, suffix and separators. Compare corresponding characters rather than reading one whole code and trying to remember it. Memory tends to normalize familiar-looking patterns and can quietly substitute a digit or swap two positions.
Whole-record and field-specific checks are different tasks. If only the six-digit lot field matters, a different prefix may be irrelevant. If case and punctuation matter, every hyphen and lowercase letter counts. Mark an unclear character for the permitted review process instead of treating uncertainty as a match. A second pass should target the known risk, such as adjacent transpositions or an O/0 substitution, rather than merely rereading at the same speed.
| Scope | What must match |
|---|---|
| Full code | Every character, separator and position |
| Named field only | That field; ignore differences outside the stated scope |
| First mismatch | Stop only after confirming the first differing position |
Common mistakes and checks
Do not rearrange characters mentally, ignore a separator, or assume letter case is irrelevant unless the matching rules say so.
- State the scope, then compare position by position.
- Explain why the tempting shortcut does not establish the required result.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
Compare XC-99841-A and XC-99814-A.
- 41 and 14 exchange positions, so the complete strings differ.
- Apply the stated rule to the evidence. The answer is Different.
Answer: Different
Worked example 2
Compare TX-4827-B and TX-4827-B.
- Every character appears in the same position.
- Apply the stated rule to the evidence. The answer is Same.
Answer: Same
Worked example 3
Compare record and master by ID, not row position. Which ID has the wrong quantity?
| List | ID | Quantity |
|---|---|---|
| Master | A 2 | 25 |
| Master | B 4 | 18 |
| Master | C 7 | 41 |
| Record | C 7 | 41 |
| Record | A 2 | 25 |
| Record | B 4 | 81 |
- Join each record to the master with the same ID.
- Different row order does not change the required quantity.
- B 4 has 81 instead of 18; C 7 correctly has 41.
Answer: B 4
Worked example 4
Compare these two sources: signed master AB-8362; unsigned note AB-8362. The rule requires the SIGNED master, with unresolved characters sent to review. What is justified?
- Use the authorized reference, not whichever source is clearer.
- A question mark records unavailable evidence.
- The signed value is fully legible and matches.
Answer: Confirm AB-8362 against the signed master
Explain the worked method
Apply a complete-code rule and a field-only rule
Use the same two records with different explicitly stated comparison scopes.
Whole reference
Reference LT-006218-Q1; candidate MX-006218-R9. Compare the whole code exactly.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
Compare the complete references LT-735184-Q2 and LT-835184-Q2. Counting every character, including hyphens, what is the first differing position?
Separate the evidence into the planning steps below before choosing the complete answer.
Planning step 1 of 3
The reference is LT-735321-Q3. Which entry is identical under a case-sensitive, punctuation-sensitive rule?
Separate the evidence into the planning steps below before choosing the complete answer.
Planning step 1 of 2
An instruction says to compare only the six-digit field in LT-735458-Q4. Which candidate matches that field even though its prefix differs?
Use the shorter plan, then finish the existing exercise yourself.
Planning step 1 of 2
Compare the complete references LT-735595-Q5 and LT-735895-Q5. Counting every character, including hyphens, what is the first differing position?
Use the shorter plan, then finish the existing exercise yourself.
Planning step 1 of 1
The reference is LT-735732-Q6. Which entry is identical under a case-sensitive, punctuation-sensitive rule?
Use the shorter plan, then finish the existing exercise yourself.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
An instruction says to compare only the six-digit field in LT-735869-Q7. Which candidate matches that field even though its prefix differs?
Compare the complete references LT-736006-Q8 and LT-7360068Q8. Counting every character, including hyphens, what is the first differing position?
The reference is LT-736143-Q2. Which entry is identical under a case-sensitive, punctuation-sensitive rule?
An instruction says to compare only the six-digit field in LT-736280-Q3. Which candidate matches that field even though its prefix differs?
Compare the complete references LT-736417-Q4 and LT-836417-Q4. Counting every character, including hyphens, what is the first differing position?
Video explanation: Serial numbers and exact matches
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
Practice Test Attention to Detail
Industrial Psychology Consultants · YouTube
Try the checking examples using a consistent left-to-right scan. Match every character, including separators, instead of recognizing only the overall shape.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.