All lessons

Compare records without overlooking small differences

Visual checking means comparing an item with a reference and deciding whether the required details agree. In an exact-match task, one changed digit, letter, sign or decimal point can make a pair different. Similar overall appearance is not enough. A quantity check may also require its unit: 250 mg and 250 g contain the same digits but name different masses. Other carefulness tasks ask you to count specified letters or apply an inspection rule to several recorded fields.

First identify the comparison rule. Does it require exact characters, the same measured amount after conversion, or compliance with a stated range? Then compare one field or short group at a time in a consistent direction. Keep the reference visible and recheck the precise position of a suspected difference. For counting, decide whether upper- and lowercase belong together before starting. This routine supports the serial-number, matching and letter-counting formats in the supplied samples. Speed becomes more useful when the checking method is stable; rushing past a decimal or changing the counting rule halfway through undermines the result.

What you will learn

  • Compare codes character by character using the task’s exact-match rule.
  • Check quantities, units and recorded fields against their reference.
  • Count specified characters consistently and verify a suspected mismatch.

Locate the exact mismatch

Compare the codes BX-47291 and BX-47921. Are they identical?

They differ: the number groups are 47291 and 47921. The digits 2 and 9 exchange positions. Matching the prefix and most digits does not make the complete codes identical.

Section assessments are untimed: 8 out of 10 records a pass. After passing every section, the mixed final requires 16 out of 20. These are website learning thresholds.

Begin first section

Section learning objectives

  1. Serial numbers and exact matches

    Detect substitutions, transpositions, omissions, and repeated characters.

  2. Quantities, units and record checking

    Check a complete record rather than an isolated number.

  3. Accuracy, speed and checking routines

    Measure accurate checking and apply a consistent process under time pressure.