Rotations, reflections & orientation
Apply a specified turn or mirror transformation without changing unrelated attributes.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Useful earlier sections
- Read the diagram labels and count positions consistently.
Read the visual evidence
Rotation turns a figure around a point; reflection flips it across a mirror line. A clockwise quarter-turn is 90 degrees. Starting at up, the clockwise direction cycle is up, right, down, left. Counterclockwise follows the reverse cycle. A half-turn is 180 degrees and points a directional arrow opposite its starting direction.
A vertical mirror swaps left and right, while a horizontal mirror swaps up and down. The mirror line matters. Some symmetric figures look unchanged after reflection, so an unchanged appearance does not prove that no operation occurred. An upward arrow is symmetric across its own vertical centre line.
Solve the pattern step by step
Identify the starting orientation before applying the operation. Trace one quarter-turn at a time for rotations; do not assume every arrow starts by pointing upward. Keep count, fill, and shape unchanged unless a second rule explicitly changes them.
For reflection, imagine folding the page on the stated mirror line and matching points at equal distances on opposite sides. Check whether left/right or up/down must swap. Test your result against the direction named in the answer choices, then use the worked solution to explain why the competing turn or mirror interpretation fails.
Compose transformations in order
A turn changes orientation around a center; a reflection swaps positions across a line. Choose one distinctive mark, record its starting position, and update it after each instruction. Clockwise is defined from the viewer looking at the diagram. A vertical mirror exchanges left and right, not top and bottom. A horizontal mirror does the converse.
Order matters. Turning an upward arrow clockwise and then reflecting left-to-right produces left; reflecting first leaves the upward arrow unchanged, and the later turn produces right. This difference is why a remembered final orientation is not enough. Write the intermediate state. Symmetric shapes may hide a transformation, so a marked corner or asymmetric arrow is better evidence than a plain circle.
- State what changes and what stays fixed.
- Write the intermediate states or constraints.
- Check every supplied condition, including evidence after a blank.
- Explain why the closest distractor fails.
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
Rotate the shown arrow 90 degrees clockwise. Where does it point?
- From up, a clockwise quarter-turn points right. The arrow does not reflect.
- Check that the selected option keeps every unchanged attribute and performs only the required change.
Answer: Right
Worked example 2
Rotate the shown arrow 90 degrees counterclockwise. Where does it point?
- Starting at right, a counterclockwise quarter-turn points up. Read the starting direction before turning.
- Check that the selected option keeps every unchanged attribute and performs only the required change.
Answer: Up
Worked example 3
Rotate the reference with 3 arrows 180° clockwise, then reflect it in a vertical mirror. In which direction do the arrows finally point?
- Apply the transformations in their written order.
- The rotation changes down to up.
- A vertical mirror exchanges right and left but preserves up and down.
- The final direction is up; count and fill do not change.
Answer: up
Worked example 4
Rotate the reference with 3 arrows 270° clockwise, then reflect it in a horizontal mirror. In which direction do the arrows finally point?
- Apply the transformations in their written order.
- The rotation changes left to down.
- A horizontal mirror exchanges up and down but preserves right and left.
- The final direction is up; count and fill do not change.
Answer: up
Common mistakes and checks
A clockwise turn and a mirror flip can look similar in one example but are different transformations.
Check your understanding
- Keep count and fill unchanged unless the instruction changes them.
- Explain the reasoning before looking at the choices.
Step 1 of 8 · Understand the task
Turning a shape and mirroring it are different operations
A rotated inspection mark keeps its shape but points in a new direction. A reflected mark is a mirror image. When a question includes both, the second operation acts on the result of the first.
Use a written direction after each operation. This avoids a common error: applying both instructions separately to the original arrow and then choosing between the two results.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
Measure the turn from the current direction
A 90° turn is a quarter-turn and a 180° turn is a half-turn. Clockwise follows the order up, right, down, left, up. Counterclockwise follows the reverse order. Write the starting direction before moving around that cycle.
Rotation changes orientation. It does not automatically change symbol count, fill or shape. If only orientation is instructed to change, hold the other attributes fixed.
Check your understanding
Name the mirror line explicitly
A vertical mirror line runs up and down, so it exchanges left and right positions. Up and down directions stay unchanged. A horizontal mirror line runs left to right and exchanges up and down. Left and right directions stay unchanged.
Perform transformations in the written order. First record the rotated direction, then apply the named mirror. Direction words in your working are safer than remembering a final picture without the intermediate stage.
Check your understanding
Detailed explanation and checks
Useful earlier sections
- Read the diagram labels and count positions consistently.
Read the visual evidence
Rotation turns a figure around a point; reflection flips it across a mirror line. A clockwise quarter-turn is 90 degrees. Starting at up, the clockwise direction cycle is up, right, down, left. Counterclockwise follows the reverse cycle. A half-turn is 180 degrees and points a directional arrow opposite its starting direction.
A vertical mirror swaps left and right, while a horizontal mirror swaps up and down. The mirror line matters. Some symmetric figures look unchanged after reflection, so an unchanged appearance does not prove that no operation occurred. An upward arrow is symmetric across its own vertical centre line.
Solve the pattern step by step
Identify the starting orientation before applying the operation. Trace one quarter-turn at a time for rotations; do not assume every arrow starts by pointing upward. Keep count, fill, and shape unchanged unless a second rule explicitly changes them.
For reflection, imagine folding the page on the stated mirror line and matching points at equal distances on opposite sides. Check whether left/right or up/down must swap. Test your result against the direction named in the answer choices, then use the worked solution to explain why the competing turn or mirror interpretation fails.
Compose transformations in order
A turn changes orientation around a center; a reflection swaps positions across a line. Choose one distinctive mark, record its starting position, and update it after each instruction. Clockwise is defined from the viewer looking at the diagram. A vertical mirror exchanges left and right, not top and bottom. A horizontal mirror does the converse.
Order matters. Turning an upward arrow clockwise and then reflecting left-to-right produces left; reflecting first leaves the upward arrow unchanged, and the later turn produces right. This difference is why a remembered final orientation is not enough. Write the intermediate state. Symmetric shapes may hide a transformation, so a marked corner or asymmetric arrow is better evidence than a plain circle.
- State what changes and what stays fixed.
- Write the intermediate states or constraints.
- Check every supplied condition, including evidence after a blank.
- Explain why the closest distractor fails.
Common mistakes and checks
A clockwise turn and a mirror flip can look similar in one example but are different transformations.
- Keep count and fill unchanged unless the instruction changes them.
- Explain the reasoning before looking at the choices.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
Rotate the shown arrow 90 degrees clockwise. Where does it point?
- From up, a clockwise quarter-turn points right. The arrow does not reflect.
- Check that the selected option keeps every unchanged attribute and performs only the required change.
Answer: Right
Worked example 2
Rotate the shown arrow 90 degrees counterclockwise. Where does it point?
- Starting at right, a counterclockwise quarter-turn points up. Read the starting direction before turning.
- Check that the selected option keeps every unchanged attribute and performs only the required change.
Answer: Up
Worked example 3
Rotate the reference with 3 arrows 180° clockwise, then reflect it in a vertical mirror. In which direction do the arrows finally point?
- Apply the transformations in their written order.
- The rotation changes down to up.
- A vertical mirror exchanges right and left but preserves up and down.
- The final direction is up; count and fill do not change.
Answer: up
Worked example 4
Rotate the reference with 3 arrows 270° clockwise, then reflect it in a horizontal mirror. In which direction do the arrows finally point?
- Apply the transformations in their written order.
- The rotation changes left to down.
- A horizontal mirror exchanges up and down but preserves right and left.
- The final direction is up; count and fill do not change.
Answer: up
Explain the worked method
Compare the order of two transformations
Start from an up arrow each time and record the result after each instruction.
Turn then mirror
Start up. Rotate 90° clockwise, then reflect across a vertical line.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
Rotate the reference with 1 arrow 90° clockwise, then reflect it in a vertical mirror. In which direction do the arrows finally point?
Separate the evidence into the planning steps below before choosing the complete answer.
Planning step 1 of 3
Rotate the reference with 1 arrow 90° clockwise, then reflect it in a horizontal mirror. In which direction do the arrows finally point?
Separate the evidence into the planning steps below before choosing the complete answer.
Planning step 1 of 2
Rotate the reference with 1 arrow 90° clockwise, then reflect it in a vertical mirror. In which direction do the arrows finally point?
Use the shorter plan, then finish the existing exercise yourself.
Planning step 1 of 1
Rotate the reference with 1 arrow 90° clockwise, then reflect it in a horizontal mirror. In which direction do the arrows finally point?
Use the shorter plan, then finish the existing exercise yourself.
Planning step 1 of 1
Rotate the reference with 1 arrow 180° clockwise, then reflect it in a vertical mirror. In which direction do the arrows finally point?
Use the shorter plan, then finish the existing exercise yourself.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
Rotate the reference with 1 arrow 180° clockwise, then reflect it in a horizontal mirror. In which direction do the arrows finally point?
Rotate the reference with 1 arrow 180° clockwise, then reflect it in a vertical mirror. In which direction do the arrows finally point?
Rotate the reference with 1 arrow 180° clockwise, then reflect it in a horizontal mirror. In which direction do the arrows finally point?
Rotate the reference with 1 arrow 270° clockwise, then reflect it in a vertical mirror. In which direction do the arrows finally point?
Rotate the reference with 1 arrow 270° clockwise, then reflect it in a horizontal mirror. In which direction do the arrows finally point?
Video explanation: Rotations, reflections & orientation
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
Examples recognizing transformations
Khan Academy · YouTube
Distinguish rotations from reflections. Follow a marked corner or feature to decide whether a shape was turned or flipped.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.