Shape sequences & changing attributes
Track shape, count, fill, and orientation independently before predicting the next panel.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Useful earlier sections
- Read the diagram labels and count positions consistently.
Read the visual evidence
Abstract reasoning uses visual relationships rather than vocabulary or a memorized calculation. Start by describing each panel using a short attribute list: shape, number of symbols, outline or filled, and direction. Keeping those attributes separate prevents a change in count from being mistaken for a change in shape.
A sequence can increase or decrease, alternate between two states, or repeat a longer block. Look for a rule that accounts for every shown transition. Use the panels and answer choices together to find a relationship that fits the whole sequence.
Solve the pattern step by step
Compare panel A with B and B with C. Write what changes and what stays fixed. If the count changes by the same amount each time, apply that amount once more. If a block repeats, identify the complete block before choosing the next member.
Predict the missing panel before reading the choices. Then eliminate options that change a fixed attribute. For example, adding one outline circle must produce more outline circles; a filled square fails even if its symbol count is correct. Speed comes from using the same attribute checklist, rather than guessing from resemblance.
Build a feature ledger
A complex figure can change in several independent ways. Make a separate row for count, shape, fill, position and orientation. Compare panel 1 with panel 2, then 2 with 3. A count may rise steadily while a fill alternates. Combining those observations too early encourages a guess based on overall appearance instead of an accountable rule.
A useful rule has to predict every visible transition and any panel shown after a gap. Try a missing panel only after writing the expected values of its attributes. A distractor often gets one attribute right and quietly changes another. When two cycles have different lengths, continue each cycle independently; a three-shape cycle and a two-fill cycle realign only after six steps.
- State what changes and what stays fixed.
- Write the intermediate states or constraints.
- Check every supplied condition, including evidence after a blank.
- Explain why the closest distractor fails.
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
Which figure comes next?
- Counts increase 1, 2, 3, so the next count is 4. Shape and fill stay unchanged.
- Check that the selected option keeps every unchanged attribute and performs only the required change.
Answer: Four circles
Worked example 2
Which figure comes next?
- Outline, filled, outline alternates back to filled. Only the fill changes.
- Check that the selected option keeps every unchanged attribute and performs only the required change.
Answer: A filled square
Worked example 3
Which figure comes next?
- Record count and fill as separate rows in a feature table.
- Counts are 4, 5, 6, so the next count is 7.
- The last fill is outline, so the next is filled.
- Combine both requirements; changing only one attribute is insufficient.
Answer: 7 squares, filled
Worked example 4
Which figure completes the sequence?
- The order is triangle, circle, square, then it starts again.
- The missing panel is the first shape of the second cycle, so it uses triangle.
- Counts alternate 4, 5, 4, so the fourth count is 5.
- Check both rules against the two panels after the blank.
Answer: 5 triangles
Common mistakes and checks
Do not choose a visually similar option before checking every transition and fixed attribute.
Check your understanding
- Verify the predicted count, shape, fill and orientation separately.
- Explain the reasoning before looking at the choices.
Step 1 of 8 · Understand the task
A changing symbol can carry more than one instruction
A printed sequence can change its count, fill and orientation independently. A plausible answer may continue one change correctly while breaking another. Recording the separate features is more reliable than choosing the panel that looks familiar.
These are original reasoning exercises. You will turn a picture into a short feature record, continue each stated rule and combine the results into one panel. The same routine helps when a drawing contains several simultaneous changes.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
Describe attributes before searching for a rule
An attribute is a feature you can describe independently: shape, count, fill, position or direction. Write one line per attribute. “Three outline circles” contains three separate facts; treating it as one overall impression hides which fact changes.
Compare the same feature between adjacent panels. A square changing to a triangle concerns shape; an outline becoming solid concerns fill. If a feature is unchanged, preserve it in the answer unless a rule says otherwise.
Check your understanding
Keep cycles with different lengths separate
A cycle is a repeating order. Shape might repeat circle, square, triangle while fill alternates outline, filled. These cycles do not need to restart together. Track the position inside each cycle separately.
Use the stated rule to predict a feature, then check every shown transition. For an alternating fill, the next fill is the opposite of the last one. Combine that with the independently predicted count or shape only at the end.
Check your understanding
Detailed explanation and checks
Useful earlier sections
- Read the diagram labels and count positions consistently.
Read the visual evidence
Abstract reasoning uses visual relationships rather than vocabulary or a memorized calculation. Start by describing each panel using a short attribute list: shape, number of symbols, outline or filled, and direction. Keeping those attributes separate prevents a change in count from being mistaken for a change in shape.
A sequence can increase or decrease, alternate between two states, or repeat a longer block. Look for a rule that accounts for every shown transition. Use the panels and answer choices together to find a relationship that fits the whole sequence.
Solve the pattern step by step
Compare panel A with B and B with C. Write what changes and what stays fixed. If the count changes by the same amount each time, apply that amount once more. If a block repeats, identify the complete block before choosing the next member.
Predict the missing panel before reading the choices. Then eliminate options that change a fixed attribute. For example, adding one outline circle must produce more outline circles; a filled square fails even if its symbol count is correct. Speed comes from using the same attribute checklist, rather than guessing from resemblance.
Build a feature ledger
A complex figure can change in several independent ways. Make a separate row for count, shape, fill, position and orientation. Compare panel 1 with panel 2, then 2 with 3. A count may rise steadily while a fill alternates. Combining those observations too early encourages a guess based on overall appearance instead of an accountable rule.
A useful rule has to predict every visible transition and any panel shown after a gap. Try a missing panel only after writing the expected values of its attributes. A distractor often gets one attribute right and quietly changes another. When two cycles have different lengths, continue each cycle independently; a three-shape cycle and a two-fill cycle realign only after six steps.
- State what changes and what stays fixed.
- Write the intermediate states or constraints.
- Check every supplied condition, including evidence after a blank.
- Explain why the closest distractor fails.
Common mistakes and checks
Do not choose a visually similar option before checking every transition and fixed attribute.
- Verify the predicted count, shape, fill and orientation separately.
- Explain the reasoning before looking at the choices.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
Which figure comes next?
- Counts increase 1, 2, 3, so the next count is 4. Shape and fill stay unchanged.
- Check that the selected option keeps every unchanged attribute and performs only the required change.
Answer: Four circles
Worked example 2
Which figure comes next?
- Outline, filled, outline alternates back to filled. Only the fill changes.
- Check that the selected option keeps every unchanged attribute and performs only the required change.
Answer: A filled square
Worked example 3
Which figure comes next?
- Record count and fill as separate rows in a feature table.
- Counts are 4, 5, 6, so the next count is 7.
- The last fill is outline, so the next is filled.
- Combine both requirements; changing only one attribute is insufficient.
Answer: 7 squares, filled
Worked example 4
Which figure completes the sequence?
- The order is triangle, circle, square, then it starts again.
- The missing panel is the first shape of the second cycle, so it uses triangle.
- Counts alternate 4, 5, 4, so the fourth count is 5.
- Check both rules against the two panels after the blank.
Answer: 5 triangles
Explain the worked method
One attribute can be right while the panel is wrong
Use the same count rule with different fill conditions. State the conditions before comparing candidates.
Count and fill both change
Counts are 2, 3, 4. Fills are outline, filled, outline. The count rises by one and fill alternates.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
Which figure comes next?
Separate the evidence into the planning steps below before choosing the complete answer.
Planning step 1 of 3
Which figure comes next?
Separate the evidence into the planning steps below before choosing the complete answer.
Planning step 1 of 2
Which figure completes the sequence?
Use the shorter plan, then finish the existing exercise yourself.
Planning step 1 of 1
Which figure comes next?
Use the shorter plan, then finish the existing exercise yourself.
Planning step 1 of 1
Which figure comes next?
Use the shorter plan, then finish the existing exercise yourself.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
Which figure completes the sequence?
Which figure comes next?
Which figure comes next?
Which figure completes the sequence?
Which figure comes next?
Video explanation: Shape sequences & changing attributes
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
IQ, APTITUDE AND DIAGRAMMATIC REASONING TESTS
CareerVidz · YouTube
Track one visual attribute at a time, such as shape count, shading, or position. Test a proposed rule against every frame before choosing an answer.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.