Before, after and conditional instructions
Translate timing and conditions into the correct sequence of actions.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Understand the concept
Before and after establish order. “Inspect before sealing” places inspection first. “Record after counting” places counting first. The first word in a sentence is not necessarily the first action in time.
If introduces a condition. “If a label is missing, set the box aside” does not say to set every box aside. Only narrows the permitted set, and not reverses a condition. Read these short words as carefully as the action verbs.
Use a repeatable method
Rewrite the instruction as a short ordered list or an if/then rule. Check whether the condition actually applies to the item in the question.
Do not apply a conditional action to every case, or silently reverse “before” and “after”.
Convert language into an order map
Before, after and until describe relationships between actions, not necessarily the order of phrases on the page. After recording the count, label the carton means count recording precedes labelling. Before labelling, record the count says the same thing. Rewrite the actions as short names joined by earlier-than arrows.
A compound instruction may specify a partial order rather than a single full order. If checking and counting must both precede sealing, their relative order is not established unless another clause supplies it. Do not invent a required order because one action is mentioned first.
Mark gates and exceptions
An action after confirmation cannot move before confirmation just because another task finishes early. Not until confirmation creates a gate: confirmation must happen before the action is permitted. Only if introduces a necessary condition; if introduces a sufficient trigger in the rule as stated.
Keep exception handling separate from the normal path. A fictional sorting instruction may say to hold unreadable labels while allowing readable ones to continue. An exception for one object is not permission to change the rule for all objects. When a text does not say what happens in a case, answer not established rather than supplying a plausible procedure.
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
Inspect before sealing. Which happens first?
- Before puts inspection earlier than sealing.
- Apply the stated rule to the evidence. The answer is Inspection.
Answer: Inspection
Worked example 2
Record the total after counting. Which happens first?
- After puts recording later than counting.
- Apply the stated rule to the evidence. The answer is Counting.
Answer: Counting
Worked example 3
Count and inspect in either order, then record both results before closing. Is inspect–count–record–close valid?
- The first two actions may occur in either order.
- Recording must follow both, and closing must follow recording.
- The proposed sequence respects each relationship; count–record–inspect–close would not.
Answer: Yes.
Worked example 4
Do not send a copy until its destination is confirmed, even if it is signed. A signed copy has an unconfirmed destination. May it be sent under the rule?
- Separate the signature from the destination-confirmation gate.
- Even if it is signed prevents using a signature as an exception to that gate.
- The required confirmation is absent, so sending is not permitted by the stated instruction.
Answer: No.
Common mistakes and checks
Mentioned first does not always mean performed first, and a completed task cannot replace a different required condition.
Check your understanding
- Rewrite order relations explicitly.
- Distinguish a full sequence from a partial order.
- Apply exception rules only to the matching case.
Step 1 of 8 · Understand the task
Separate the normal order from its exceptions
A dispatch instruction may allow two checks to happen together but still forbid dispatch until both are complete. A list of verbs alone does not show these dependencies.
Turn the wording into a small sequence: identify what must happen first, which event unlocks the next action, and what changes when an exception is met. A finished early step does not automatically authorize the last one.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
Before and after connect two events
Before gives a precedence relation: A before B means finish A first. After entering a total, attach a card means the entry precedes attachment. Write one arrow for each stated link, then combine them.
Immediately after asks for the next event, whereas at some later point may allow intervening work. Preserve that distinction when selecting a sequence.
Check your understanding
Only after is a gate, not a prediction
Only after names a necessary condition. Until that condition is complete, the later action is blocked. Completion may permit the action without proving the action has happened.
Conditional branches apply to the matching case. If an unreadable page goes to review, do not send every readable page there too. Keep the ordinary path and the exception separate.
Check your understanding
Detailed explanation and checks
Understand the concept
Before and after establish order. “Inspect before sealing” places inspection first. “Record after counting” places counting first. The first word in a sentence is not necessarily the first action in time.
If introduces a condition. “If a label is missing, set the box aside” does not say to set every box aside. Only narrows the permitted set, and not reverses a condition. Read these short words as carefully as the action verbs.
Use a repeatable method
Rewrite the instruction as a short ordered list or an if/then rule. Check whether the condition actually applies to the item in the question.
Do not apply a conditional action to every case, or silently reverse “before” and “after”.
Convert language into an order map
Before, after and until describe relationships between actions, not necessarily the order of phrases on the page. After recording the count, label the carton means count recording precedes labelling. Before labelling, record the count says the same thing. Rewrite the actions as short names joined by earlier-than arrows.
A compound instruction may specify a partial order rather than a single full order. If checking and counting must both precede sealing, their relative order is not established unless another clause supplies it. Do not invent a required order because one action is mentioned first.
Mark gates and exceptions
An action after confirmation cannot move before confirmation just because another task finishes early. Not until confirmation creates a gate: confirmation must happen before the action is permitted. Only if introduces a necessary condition; if introduces a sufficient trigger in the rule as stated.
Keep exception handling separate from the normal path. A fictional sorting instruction may say to hold unreadable labels while allowing readable ones to continue. An exception for one object is not permission to change the rule for all objects. When a text does not say what happens in a case, answer not established rather than supplying a plausible procedure.
Common mistakes and checks
Mentioned first does not always mean performed first, and a completed task cannot replace a different required condition.
- Rewrite order relations explicitly.
- Distinguish a full sequence from a partial order.
- Apply exception rules only to the matching case.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
Inspect before sealing. Which happens first?
- Before puts inspection earlier than sealing.
- Apply the stated rule to the evidence. The answer is Inspection.
Answer: Inspection
Worked example 2
Record the total after counting. Which happens first?
- After puts recording later than counting.
- Apply the stated rule to the evidence. The answer is Counting.
Answer: Counting
Worked example 3
Count and inspect in either order, then record both results before closing. Is inspect–count–record–close valid?
- The first two actions may occur in either order.
- Recording must follow both, and closing must follow recording.
- The proposed sequence respects each relationship; count–record–inspect–close would not.
Answer: Yes.
Worked example 4
Do not send a copy until its destination is confirmed, even if it is signed. A signed copy has an unconfirmed destination. May it be sent under the rule?
- Separate the signature from the destination-confirmation gate.
- Even if it is signed prevents using a signature as an exception to that gate.
- The required confirmation is absent, so sending is not permitted by the stated instruction.
Answer: No.
Explain the worked method
Change one prerequisite and check the permission
Read each case independently; do not carry a completed condition from one case into the next.
Both conditions complete
Release requires a signed review and a confirmed destination. Both are present.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
Which action must occur first?
In this fictional sorting exercise, count the tags before entering the total. After entering the total, attach the date card. Close the folder only after the date card is attached.
Build the first link before considering the final folder action.
Planning step 1 of 2
Which action immediately follows entering the total in the stated sequence?
In this fictional sorting exercise, count the tags before entering the total. After entering the total, attach the date card. Close the folder only after the date card is attached.
Identify the immediate successor, not an eventual final step.
Planning step 1 of 1
Which complete order respects the instruction?
In this fictional sorting exercise, count the tags before entering the total. After entering the total, attach the date card. Close the folder only after the date card is attached.
Combine every arrow into one consistent chain.
Planning step 1 of 1
The total is entered but no date card is attached. Which action is still blocked?
In this fictional sorting exercise, count the tags before entering the total. After entering the total, attach the date card. Close the folder only after the date card is attached.
Check which prerequisite is still missing.
Planning step 1 of 1
Which claim is not stated?
In this fictional sorting exercise, count the tags before entering the total. After entering the total, attach the date card. Close the folder only after the date card is attached.
Interpret the selection task before evaluating each offered claim.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
Which pair may be performed in either order?
Check the address and count the envelopes in either order. Both tasks must be complete before signing the summary. Send the summary only after it is signed.
Checking is complete but counting is not. What does the rule permit us to conclude about signing?
Check the address and count the envelopes in either order. Both tasks must be complete before signing the summary. Send the summary only after it is signed.
Which order is valid?
Check the address and count the envelopes in either order. Both tasks must be complete before signing the summary. Send the summary only after it is signed.
Does mentioning the address check first prove it must happen before counting?
Check the address and count the envelopes in either order. Both tasks must be complete before signing the summary. Send the summary only after it is signed.
Which necessary condition for sending is stated?
Check the address and count the envelopes in either order. Both tasks must be complete before signing the summary. Send the summary only after it is signed.
Video explanation: Before, after and conditional instructions
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
Using Conditional Sentences in English - 5 Levels of Difficulty
Oxford Online English · YouTube
Start with the simpler conditional examples. Identify the condition and the required action, then practise the before/after instructions from this section separately.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.