Combining rules, ranges and exceptions
Apply several conditions in order and distinguish compliance from a plausible guess.
Every step can be opened directly. Reading, exploring and practice do not record a section pass; the untimed assessment does.
Full explanations and worked examples
Understand the reasoning task
A multi-rule task combines logic with accurate reading. Build a checklist for every requirement, mark which facts establish it, and keep exceptions separate. A correct reference number does not establish the correct mass or an intact seal. If all three are required, one failure decides the result even when the remaining two pass.
Range language matters. Inclusive endpoints belong to the allowed set; strictly above or below excludes an endpoint. A measurement just outside a range remains outside unless an explicit rounding rule changes how it is compared. Do not invent a tolerance from a similar example or use an average to hide an individual failed requirement.
Read exceptions in their stated order. A sentence beginning unless may change which action follows from a condition, but it does not automatically waive every other rule. When information is missing, say which requirement cannot yet be established. These are hypothetical reasoning rules, not operating permissions for actual factory equipment.
A repeatable solution method
Read the requested conclusion before using any numbers. State the rule or unknown, organize the evidence, and test whether the answer follows without extra assumptions. Check a boundary value or a contrasting example before choosing.
- Identify the target.
- Test each rule or statement separately.
- Combine only the relationships actually supplied.
- Verify the result against all the original information.
Step-by-step worked examples
Read the question, identify the rule and unknown, then follow each transformation. Check the answer against the original conditions before moving on.
Worked example 1
A training rule accepts a coded sample only when its reference is T91, its mass is 70–78 g inclusive, and its seal is intact. It has reference T91, mass 69 g and an intact seal. What follows?
- List the three required conditions; do not merge independent evidence.
- The reference and seal conditions pass.
- Compare 69 with inclusive bounds 70 and 78: outside.
- AND requires all three, so the failed mass test prevents acceptance.
Answer: It fails the mass condition
Worked example 2
A training rule accepts a coded sample only when its reference is T95, its mass is 74–82 g inclusive, and its seal is intact. It has reference T95, mass 78 g and an intact seal. What follows?
- List the three required conditions; do not merge independent evidence.
- The reference and seal conditions pass.
- Compare 78 with inclusive bounds 74 and 82: inside.
- AND requires all three, so the sample meets the rule.
Answer: It meets every stated condition
Worked example 3
A training rule accepts a coded sample only when its reference is T99, its mass is 78–86 g inclusive, and its seal is intact. It has reference T99, mass 87 g and an intact seal. What follows?
- List the three required conditions; do not merge independent evidence.
- The reference and seal conditions pass.
- Compare 87 with inclusive bounds 78 and 86: outside.
- AND requires all three, so the failed mass test prevents acceptance.
Answer: It fails the mass condition
Worked example 4
A training rule accepts a coded sample only when its reference is T104, its mass is 83–91 g inclusive, and its seal is intact. It has reference T104, mass 87 g and an intact seal. What follows?
- List the three required conditions; do not merge independent evidence.
- The reference and seal conditions pass.
- Compare 87 with inclusive bounds 83 and 91: inside.
- AND requires all three, so the sample meets the rule.
Answer: It meets every stated condition
Common mistakes and checks
Useful information is not always sufficient, and a plausible conclusion is not necessarily guaranteed.
Check your understanding
- Explain why the other answers are unsupported.
- Use a counterexample to disprove a necessary conclusion.
Step 1 of 8 · Understand the task
A matching reference cannot prove the mass or seal
An acceptance instruction can contain an exact code, a numerical interval and a physical condition such as an intact seal. Each requires its own evidence. One matching field cannot act as a substitute for all the others.
Translate the full instruction into individual tests, including endpoint rules. Then decide whether every required condition is satisfied without adding exceptions that were not stated.
Make a prediction before learning the rule
Make your best prediction, then use the explanations in the next step to check the reasoning.
Read inclusive intervals at both endpoints
An inclusive interval from 40 to 48 g means 40 ≤ mass ≤ 48. Both endpoints belong to the interval. A value of 39 is too low and 49 is too high; being close to the range is not the same as being in it.
Compare values in one unit, and test both boundaries. A value above the lower bound can still exceed the upper bound. The interval is only one part of a combined acceptance rule.
Check your understanding
Require all conditions and apply only stated exceptions
Write a checklist with one row for reference, one for mass and one for seal. An AND rule accepts only when every row passes. If one row fails, identify that failure rather than claiming the other measurements are also wrong.
An exception changes a rule only within its stated scope. Do not invent an exception because a value is near the limit or another field looks especially reliable. If evidence is missing, keep the result uncertain instead of pretending a condition passed.
Check your understanding
Detailed explanation and checks
Understand the reasoning task
A multi-rule task combines logic with accurate reading. Build a checklist for every requirement, mark which facts establish it, and keep exceptions separate. A correct reference number does not establish the correct mass or an intact seal. If all three are required, one failure decides the result even when the remaining two pass.
Range language matters. Inclusive endpoints belong to the allowed set; strictly above or below excludes an endpoint. A measurement just outside a range remains outside unless an explicit rounding rule changes how it is compared. Do not invent a tolerance from a similar example or use an average to hide an individual failed requirement.
Read exceptions in their stated order. A sentence beginning unless may change which action follows from a condition, but it does not automatically waive every other rule. When information is missing, say which requirement cannot yet be established. These are hypothetical reasoning rules, not operating permissions for actual factory equipment.
A repeatable solution method
Read the requested conclusion before using any numbers. State the rule or unknown, organize the evidence, and test whether the answer follows without extra assumptions. Check a boundary value or a contrasting example before choosing.
- Identify the target.
- Test each rule or statement separately.
- Combine only the relationships actually supplied.
- Verify the result against all the original information.
Common mistakes and checks
Useful information is not always sufficient, and a plausible conclusion is not necessarily guaranteed.
- Explain why the other answers are unsupported.
- Use a counterexample to disprove a necessary conclusion.
Follow the worked method
Read worked example 1, then explain its method in the check below. Compare the remaining examples to see where the same method applies and where the conditions change.
Worked example 1
A training rule accepts a coded sample only when its reference is T91, its mass is 70–78 g inclusive, and its seal is intact. It has reference T91, mass 69 g and an intact seal. What follows?
- List the three required conditions; do not merge independent evidence.
- The reference and seal conditions pass.
- Compare 69 with inclusive bounds 70 and 78: outside.
- AND requires all three, so the failed mass test prevents acceptance.
Answer: It fails the mass condition
Worked example 2
A training rule accepts a coded sample only when its reference is T95, its mass is 74–82 g inclusive, and its seal is intact. It has reference T95, mass 78 g and an intact seal. What follows?
- List the three required conditions; do not merge independent evidence.
- The reference and seal conditions pass.
- Compare 78 with inclusive bounds 74 and 82: inside.
- AND requires all three, so the sample meets the rule.
Answer: It meets every stated condition
Worked example 3
A training rule accepts a coded sample only when its reference is T99, its mass is 78–86 g inclusive, and its seal is intact. It has reference T99, mass 87 g and an intact seal. What follows?
- List the three required conditions; do not merge independent evidence.
- The reference and seal conditions pass.
- Compare 87 with inclusive bounds 78 and 86: outside.
- AND requires all three, so the failed mass test prevents acceptance.
Answer: It fails the mass condition
Worked example 4
A training rule accepts a coded sample only when its reference is T104, its mass is 83–91 g inclusive, and its seal is intact. It has reference T104, mass 87 g and an intact seal. What follows?
- List the three required conditions; do not merge independent evidence.
- The reference and seal conditions pass.
- Compare 87 with inclusive bounds 83 and 91: inside.
- AND requires all three, so the sample meets the rule.
Answer: It meets every stated condition
Explain the worked method
Test an endpoint and a near miss
A training rule requires code Z8, mass 20–24 g inclusive and an intact seal.
Exact boundary
The sample has Z8, mass 24 g and an intact seal.
Predict before comparing
Make a prediction and check your reasoning to see the comparison.
Guided practice with less help each time
Work through five exercises. Check each planning step before the final answer; hints become less detailed as you practise.
Guided exercise 1 of 5 · 0 solved
Check one planning step at a time, then give the final answer. Hints stay optional. Viewing a solution does not count as solving the exercise, and guided work does not record a section pass. These practice inputs last in this open page; assessments save separately.
A training rule accepts a coded sample only when its reference is T61, its mass is 40–48 g inclusive, and its seal is intact. It has reference T61, mass 39 g and an intact seal. What follows?
Separate the evidence into the planning steps below before choosing the complete answer.
Planning step 1 of 3
A training rule accepts a coded sample only when its reference is T62, its mass is 41–49 g inclusive, and its seal is intact. It has reference T62, mass 45 g and an intact seal. What follows?
Separate the evidence into the planning steps below before choosing the complete answer.
Planning step 1 of 2
A training rule accepts a coded sample only when its reference is T63, its mass is 42–50 g inclusive, and its seal is intact. It has reference T63, mass 51 g and an intact seal. What follows?
Use the shorter plan, then finish the existing exercise yourself.
Planning step 1 of 1
A training rule accepts a coded sample only when its reference is T64, its mass is 43–51 g inclusive, and its seal is intact. It has reference T64, mass 42 g and an intact seal. What follows?
Use the shorter plan, then finish the existing exercise yourself.
Planning step 1 of 1
A training rule accepts a coded sample only when its reference is T65, its mass is 44–52 g inclusive, and its seal is intact. It has reference T65, mass 48 g and an intact seal. What follows?
Use the shorter plan, then finish the existing exercise yourself.
Planning step 1 of 1
Solve five questions independently
Try each problem without hints. Check after answering and compare the explanation with your own method. These are different questions from the assessment.
Question 1 of 5 · 0 checked
A training rule accepts a coded sample only when its reference is T66, its mass is 45–53 g inclusive, and its seal is intact. It has reference T66, mass 54 g and an intact seal. What follows?
A training rule accepts a coded sample only when its reference is T67, its mass is 46–54 g inclusive, and its seal is intact. It has reference T67, mass 45 g and an intact seal. What follows?
A training rule accepts a coded sample only when its reference is T68, its mass is 47–55 g inclusive, and its seal is intact. It has reference T68, mass 51 g and an intact seal. What follows?
A training rule accepts a coded sample only when its reference is T69, its mass is 48–56 g inclusive, and its seal is intact. It has reference T69, mass 57 g and an intact seal. What follows?
A training rule accepts a coded sample only when its reference is T70, its mass is 49–57 g inclusive, and its seal is intact. It has reference T70, mass 48 g and an intact seal. What follows?
Video explanation: Combining rules, ranges and exceptions
Optional extra study. Pause to solve the examples on paper, then try this section’s practice questions. Watching does not count as assessment completion.
Review number patterns, then explain every alternating or layered rule in the written examples. One locally matching difference is not enough to establish a full pattern.
Loading video preference…
Players are shown by default unless you have blocked videos in privacy choices. Loading a player connects to Google. Press Play to watch, or close the player above. Videos may include ads or course promotions.